Log of /branches/intelc_win32/finley/test
Directory Listing
Revision
755 -
Directory Listing
Modified
Mon Jun 26 09:31:20 2006 UTC
(16 years, 9 months ago)
by
woo409
+get run_visualization_interface.py to look for test files in win32 area. Tests still fail because of the ordering issues mentioned in previous logs.
Revision
754 -
Directory Listing
Modified
Mon Jun 26 08:00:38 2006 UTC
(16 years, 9 months ago)
by
woo409
+ Discussion with Lutz Gross showed the tests to be dependent on the sort order, not escript itself. As a result I've backed out the addition of qsortG. Win32 will fail file comparison tests in run_generators.py (unless it uses its own generated versions). It will also fail ...onContactZero/One (8 of them) tests in run_utilOnFinley.py since the sort order change causes some of the normals to be defined the opposite way around to the reference test orientation since they are defined on the opposite face.
Revision
752 -
Directory Listing
Modified
Mon Jun 26 02:25:41 2006 UTC
(16 years, 9 months ago)
by
woo409
+ Added a qsort.c file which contains a drop in replacement for qsort (call it as qsortG). This one appears to be a stable implementation and the test .msh files on windows have been set up to be the same as unix again except for the exponent digits (3 instead of 2).
With ALL the qsorts replaced with qsortG only two tests fail now on win32:
test_normal_onFunctionOnContactOne
test_normal_onFunctionOnContactZero
Both give wrong result errors.
I will check this same code on the altix (including the use of qsortG and see if Altix has the same problem.
Revision
748 -
Directory Listing
Modified
Sat Jun 24 15:09:10 2006 UTC
(16 years, 9 months ago)
by
woo409
+ run_generators.py now has a commented section that you can uncomment to have it dump out the reference files
+ Win32 output files differ not only in the exponent (e+000 instead of e+00) format but also in order for part of the file. The same code has been compiled on altix and it passes the tests with the original files. I've no idea why the win32 version produces a different order.
THIS REQUIRES FURTHER INVESTIGATION
Does the output file require the lines to be in a specific order (it doesn't appear to effect anything else)?
Revision
747 -
Directory Listing
Modified
Sat Jun 24 12:58:50 2006 UTC
(16 years, 9 months ago)
by
woo409
+ re-enabled all the tests in run_generators.py
+ Fixed up some extra #includes left over from initial port
+ nelix_kb_options.py now has some additional optimisation flags for my notebooks pentium M processor
Revision
746 -
Directory Listing
Modified
Sat Jun 24 12:47:22 2006 UTC
(16 years, 9 months ago)
by
woo409
+ Just turning on and off a few tests in run_generators which is currently producing different order in the outputs for files with contacts. The lines are the same just in a different order. Quite strange.
Revision
745 -
Directory Listing
Modified
Sat Jun 24 12:16:19 2006 UTC
(16 years, 9 months ago)
by
woo409
+ The joys of cross-platform and multi-language development. You can't use C preprocessor macros in a PYTHON file!!! <grin>
Revision
743 -
Directory Listing
Modified
Sat Jun 24 11:44:55 2006 UTC
(16 years, 9 months ago)
by
woo409
+ Some additional files for the win32 port
+ The additional test meshes are because windows produces floating point numbers like this 12e+001 where are unix is 12e+01
+ nelix_kb_options.py is my notebooks config file. I've included it as an example of win32 compilation options
+ system_dep.h is there for win32 shared library function export/import macros and also to use the intel mathimf.h library since the standard MS VC++ math.h doesn't have all the necessary functions. NOTE this file must be included before all other headers to prevent inclusion of math.h
Revision
742 -
Directory Listing
Modified
Sat Jun 24 11:27:16 2006 UTC
(16 years, 9 months ago)
by
woo409
+ Initial commit of win32 port using intel c++ compiler 9.1.x for Windows
+ This version is failing some file handling tests in python
Revision
709 -
Directory Listing
Modified
Wed Apr 26 06:35:36 2006 UTC
(16 years, 11 months ago)
by
gross
Original Path:
trunk/finley/test
fixes to get scons py_tests going: mainly fixes in the pathes
Revision
706 -
Directory Listing
Modified
Sat Apr 8 16:13:02 2006 UTC
(16 years, 11 months ago)
by
gross
Original Path:
trunk/finley/test
python tests compile and run but there is still a problem with dependencies'
Revision
700 -
Directory Listing
Modified
Thu Apr 6 00:13:40 2006 UTC
(16 years, 11 months ago)
by
gross
Original Path:
trunk/finley/test
A few changes in the build mechanism and the file structure so scons can build release tar files:
* paso/src/Solver has been moved to paso/src
* all test_.py are now run_.py files and are assumed to be passing python tests. they can run by
scons py_tests and are part of the release test set
* escript/py_src/test_ are moved to escript/test/python and are installed in to the build directory
(rather then the PYTHONPATH).
* all py files in test/python which don't start with run_ or test_ are now 'local_py_tests'. they are installed i
by not run automatically.
* CppUnitTest is now treated as a escript module (against previous decisions).
* scons realse builds nor tar/zip files with relvant source code (src and tests in seperate files)
the python tests don't pass yet due to path problems.
Revision
690 -
Directory Listing
Modified
Tue Mar 28 07:18:51 2006 UTC
(17 years ago)
by
robwdcock
Original Path:
trunk/finley/test
+ Added basic_py_tests target which will run the basic set of python tests. The list of python tests was taken from autoscons
Revision
682 -
Directory Listing
Modified
Mon Mar 27 02:43:09 2006 UTC
(17 years ago)
by
robwdcock
Original Path:
trunk/finley/test
+ NEW BUILD SYSTEM
This commit contains the new build system with cross-platform support.
Most things work are before though you can have more control.
ENVIRONMENT settings have changed:
+ You no longer require LD_LIBRARY_PATH or PYTHONPATH to point to the
esysroot for building and testing performed via scons
+ ACcESS altix users: It is recommended you change your modules to load
the latest intel compiler and other libraries required by boost to match
the setup in svn (you can override). The correct modules are as follows
module load intel_cc.9.0.026
export
MODULEPATH=${MODULEPATH}:/data/raid2/toolspp4/modulefiles/gcc-3.3.6
module load boost/1.33.0/python-2.4.1
module load python/2.4.1
module load numarray/1.3.3
Revision
595 -
Directory Listing
Modified
Tue Mar 14 23:52:45 2006 UTC
(17 years ago)
by
gross
Original Path:
trunk/finley/test
test_utilOnFinley fixed (did run the tests that still fail)
Revision
474 -
Directory Listing
Modified
Mon Jan 30 04:23:44 2006 UTC
(17 years, 2 months ago)
by
jgs
Original Path:
trunk/finley/test
restructure escript source tree
move src/Data/* -> src
remove inc
modify #includes and cpppath settings accordingly
Revision
473 -
Directory Listing
Modified
Fri Jan 27 01:59:09 2006 UTC
(17 years, 2 months ago)
by
jgs
Original Path:
trunk/finley/test
make adjustments to allow for new source tree structure
Revision
467 -
Directory Listing
Modified
Wed Jan 25 05:43:46 2006 UTC
(17 years, 2 months ago)
by
jgs
Original Path:
trunk/finley/test
adjustments to includes to allow for new paso src tree structure
Revision
442 -
Directory Listing
Modified
Fri Jan 20 04:39:43 2006 UTC
(17 years, 2 months ago)
by
gross
Original Path:
trunk/finley/test
kronecker (and relatives) take now a FunctionSpace as argument and return a Data object in tthis functionspace
Revision
437 -
Directory Listing
Modified
Fri Jan 20 00:16:58 2006 UTC
(17 years, 2 months ago)
by
gross
Original Path:
trunk/finley/test
comprehensive testing for integrate function added. tests for grad will be added in the next check in. GradTest is obsolete now.
Revision
428 -
Directory Listing
Modified
Wed Jan 11 01:38:16 2006 UTC
(17 years, 2 months ago)
by
gross
Original Path:
trunk/finley/test
interplotared is changed from method to function call
Revision
425 -
Directory Listing
Modified
Tue Jan 10 04:10:39 2006 UTC
(17 years, 2 months ago)
by
gross
Original Path:
trunk/finley/test
The sparse solver can be called by paso now.
the building has been change to reduce some code redundancy:
now all scons SCscripts are importing scons/esys_options.py which
imports platform specific settings.
Revision
423 -
Directory Listing
Modified
Fri Jan 6 08:09:43 2006 UTC
(17 years, 2 months ago)
by
gross
Original Path:
trunk/finley/test
some modifications in visualization to get equidistant output
Revision
399 -
Directory Listing
Modified
Wed Dec 21 22:43:48 2005 UTC
(17 years, 3 months ago)
by
gross
Original Path:
trunk/finley/test
frame to run a single test out of the test_util suite
Revision
362 -
Directory Listing
Modified
Thu Dec 15 02:07:55 2005 UTC
(17 years, 3 months ago)
by
jgs
Original Path:
trunk/finley/test
removed unit-test runner scripts as unit-tests now run from scons
Revision
360 -
Directory Listing
Modified
Thu Dec 15 01:52:16 2005 UTC
(17 years, 3 months ago)
by
jgs
Original Path:
trunk/finley/test
add target to run all unit tests, the build will fail
for this target if any unit test fails
Revision
325 -
Directory Listing
Modified
Wed Dec 7 02:08:17 2005 UTC
(17 years, 3 months ago)
by
jgs
Original Path:
trunk/finley/test
now determine hostname via socket.gethostname() as HOSTNAME
environment variable is apparently not set on all platforms
Revision
288 -
Directory Listing
Modified
Fri Dec 2 01:55:04 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
now automatically build unit tests as required based on dependencies
between unit tests and libraries
Revision
255 -
Directory Listing
Modified
Tue Nov 29 06:13:22 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
pass in solver libraries to link with via options files now
Revision
252 -
Directory Listing
Modified
Tue Nov 29 05:58:03 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
pass in platform specific libraries via options files now
Revision
248 -
Directory Listing
Modified
Tue Nov 29 04:58:23 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
add top level scons config files to allow building
of all unit tests for each module at once
Revision
246 -
Directory Listing
Modified
Tue Nov 29 04:27:00 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
allow compile options to be loaded from a config
file specified on the command line to scons
Revision
241 -
Directory Listing
Modified
Mon Nov 28 06:14:47 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
if usegcc=1 is set on command line, load compiler options
fropm scons/gcc_options.py
Revision
239 -
Directory Listing
Modified
Mon Nov 28 05:49:32 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
read names of python and boost libraries from config file now
Revision
206 -
Directory Listing
Modified
Wed Nov 23 05:03:42 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
remove MeshAdapter test for now - will only work with scons build system
Revision
205 -
Directory Listing
Modified
Wed Nov 23 05:02:59 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
fix settings to account for new finley source tree structure
Revision
204 -
Directory Listing
Modified
Wed Nov 23 04:43:51 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
revised scons files to account for new finley source tree structure
Revision
155 -
Directory Listing
Modified
Wed Nov 9 02:02:19 2005 UTC
(17 years, 4 months ago)
by
jgs
Original Path:
trunk/finley/test
move all directories from trunk/esys2 into trunk and remove esys2
Revision
152 -
Directory Listing
Modified
Fri Oct 21 08:32:21 2005 UTC
(17 years, 5 months ago)
by
phornby
Original Path:
trunk/esys2/finley/test
DataConstantTestCase.cpp, DataExpandedTestCase.cpp:
Replace
DataExpanded testData1(FunctionSpace(),....)
with
FunctionSpace tmp_fns;
DataExpanded testData1(tmp_fns,shape,data);
for GCC's sake.
Added some profiling to PoissonSolverTest.py.
