/[escript]/trunk/doc/cookbook/example01.tex
ViewVC logotype

Annotation of /trunk/doc/cookbook/example01.tex

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2606 - (hide annotations)
Thu Aug 13 04:32:23 2009 UTC (10 years, 1 month ago) by ahallam
Original Path: trunk/doc/cookbook/TEXT/onedheatdiff001.tex
File MIME type: application/x-tex
File size: 23008 byte(s)
Updates to first chapter in cookbook -> approaching completion.
New figures added for model descriptions.
Scripts updated to use pylab/matplotlib and movie making scripts added for *.avi creation.
Still to finalise in chapter 1
- twodheatdiff model of intrusion
	-contouring

- heat refraction scripts and begin cookbook sections
	- pycad discussion
	- steady state pde discussion
	- quiver plot discussion
1 ahallam 2401
2     %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
3     %
4     % Copyright (c) 2003-2009 by University of Queensland
5     % Earth Systems Science Computational Center (ESSCC)
6     % http://www.uq.edu.au/esscc
7     %
8     % Primary Business: Queensland, Australia
9     % Licensed under the Open Software License version 3.0
10     % http://www.opensource.org/licenses/osl-3.0.php
11     %
12     %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
13    
14     \section{One Dimensional Heat Diffusion in an Iron Rod}
15     %\label{Sec:1DHDv0}
16 ahallam 2495 We will start by examining a simple one dimensional heat diffusion example. This problem will provide a good launch pad to build our knowledge of \ESCRIPT and how to solve simple partial differential equations (PDEs)\footnote{Wikipedia provides an excellent and comprehensive introduction to \textit{Partial Differential Equations} \url{http://en.wikipedia.org/wiki/Partial_differential_equation}, however their relevance to \ESCRIPT and implementation should become a clearer as we develop our understanding further into the cookbook.}
17 ahallam 2401
18 ahallam 2494 \begin{figure}[h!]
19     \centerline{\includegraphics[width=4.in]{figures/onedheatdiff}}
20     \caption{One dimensional model of an Iron bar.}
21     \label{fig:onedhdmodel}
22     \end{figure}
23 ahallam 2495 The first model consists of a simple cold iron bar at a constant temperature of zero \reffig{fig:onedhdmodel}. The bar is perfectly insulated on all sides with a heating element at one end. Intuition tells us that as heat is applied; energy will disperse along the bar via conduction. With time the bar will reach a constant temperature equivalent to the heat source.
24 ahallam 2401
25 ahallam 2495 \subsection{1D Heat Diffusion Equation}
26     We can model the heat distribution of this problem over time using the one dimensional heat diffusion equation\footnote{A detailed discussion on how the heat diffusion equation is derived can be found at \url{http://online.redwoods.edu/instruct/darnold/DEProj/sp02/AbeRichards/paper.pdf}};
27 ahallam 2494 which is defined as:
28 ahallam 2401 \begin{equation}
29     \rho c\hackscore p \frac{\partial T}{\partial t} - \kappa \frac{\partial^{2} T}{\partial x^{2}} = q\hackscore H
30     \label{eqn:hd}
31     \end{equation}
32 ahallam 2495 where $\rho$ is the material density, $c\hackscore p$ is the specific heat and $\kappa$ is the thermal conductivity constant for a given material\footnote{A list of some common thermal conductivities is available from Wikipedia \url{http://en.wikipedia.org/wiki/List_of_thermal_conductivities}}.
33     The heat source is defined by the right hand side of \ref{eqn:hd} as $q\hackscore{H}$; this can take the form of a constant or a function of time and space. For example $q\hackscore{H} = Te^{-\gamma t}$ where we have the output of our heat source decaying with time. There are also two partial derivatives in \ref{eqn:hd}; $\frac{\partial T}{\partial t}$ describes the change in temperature with time while $\frac{\partial ^2 T}{\partial x^2}$ is the spatial change of temperature. As there is only a single spatial dimension to our problem, our temperature solution $T$ is only dependent on the time $t$ and our position along the iron bar $x$.
34 ahallam 2401
35 ahallam 2495 \subsection{Escript, PDEs and The General Form}
36 ahallam 2606 Potentially, it is now possible to solve \ref{eqn:hd} analytically and this would produce an exact solution to our problem. However, it is not always possible or practical to solve a problem this way. Alternatively, computers can be used to solve these kinds of problems when a large number of sums or a more complex visualisation is required. To do this, a numerical approach is required - \ESCRIPT can help us here - and it becomes necessary to discretize the equation so that we are left with a finite number of equations for a finite number of spatial and time steps in the model. While discretization introduces approximations and a degree of error, we find that a sufficiently sampled model is generally accurate enough for the requirements of the modeller.
37 gross 2477
38 ahallam 2606 \ESCRIPT interfaces with any given PDE via a general form. In this example we will illustrate a simpler version of the full linear PDE general form which is available in the \ESCRIPT user's guide. A simplified form that suits our heat diffusion problem\footnote{In the form of the \ESCRIPT users guide which using the Einstein convention is written as
39 gross 2477 $-(A\hackscore{jl} u\hackscore{,l})\hackscore{,j}+D u =Y$}
40 ahallam 2606 is described by;
41 gross 2477 \begin{equation}\label{eqn:commonform nabla}
42 ahallam 2411 -\nabla.(A.\nabla u) + Du = f
43     \end{equation}
44 ahallam 2494 where $A$, $D$ and $f$ are known values. The symbol $\nabla$ which is called the \textit{Nabla operator} or \textit{del operator} represents
45 ahallam 2495 the spatial derivative of its subject - in this case $u$. Lets assume for a moment that we deal with a one-dimensional problem then ;
46 gross 2477 \begin{equation}
47     \nabla = \frac{\partial}{\partial x}
48     \end{equation}
49 ahallam 2495 and we can write \ref{eqn:commonform nabla} as;
50 ahallam 2411 \begin{equation}\label{eqn:commonform}
51 gross 2477 -A\frac{\partial^{2}u}{\partial x^{2}} + Du = f
52 ahallam 2411 \end{equation}
53 ahallam 2606 if $A$ is constant then \ref{eqn:commonform} is consistent with our heat diffusion problem in \ref{eqn:hd} with the exception of $u$ and when comparing equations \ref{eqn:hd} and \ref{eqn:commonform} we see that;
54 ahallam 2411 \begin{equation}
55 ahallam 2494 A = \kappa; D = \rho c \hackscore{p}; f = q \hackscore{H}
56 ahallam 2411 \end{equation}
57 gross 2477
58 ahallam 2495 We can write the partial $\frac{\partial T}{\partial t}$ in terms of $u$ by discretising the time of our solution. The method we will use is the Backwards Euler approximation, which states;
59 ahallam 2494 \begin{equation}
60     f'(x) \approx \frac{f(x+h)-f(x)}{h}
61     \label{eqn:beuler}
62     \end{equation}
63     where h is the the discrete step size $\Delta x$.
64 ahallam 2495 Now let $f(x) = T(t)$ and from \ref{eqn:beuler} we see that;
65 ahallam 2494 \begin{equation}
66     T'(t) \approx \frac{T(t+h) - T(t)}{h}
67     \end{equation}
68     which can also be written as;
69     \begin{equation}
70     T\hackscore{,t}^{(n)} \approx \frac{T^{(n)} - T^{(n-1)}}{h}
71     \label{eqn:Tbeuler}
72     \end{equation}
73 ahallam 2495 where $n$ denotes the n\textsuperscript{th} time step. Substituting \ref{eqn:Tbeuler} into \ref{eqn:hd} we get;
74 ahallam 2494 \begin{equation}
75     \frac{\rho c\hackscore p}{h} (T^{(n)} - T^{(n-1)}) - \kappa \frac{\partial^{2} T}{\partial x^{2}} = q\hackscore H
76     \label{eqn:hddisc}
77     \end{equation}
78 ahallam 2606 To fit our simplified general form we can rearrange \ref{eqn:hddisc};
79 ahallam 2494 \begin{equation}
80     \frac{\rho c\hackscore p}{h} T^{(n)} - (\kappa T^{(n)}\hackscore{,i})\hackscore{,i} = q\hackscore H + \frac{\rho c\hackscore p}{h} T^{(n-1)}
81     \label{eqn:hdgenf}
82     \end{equation}
83 ahallam 2495 This is the form required for \ESCRIPT to solve our PDE across the domain for successive time nodes $t^{(n)}$ where
84     $t^{(0)}=0$ and $t^{(n)}=t^{(n-1)}+h$ where $h>0$ is the step size and assumed to be constant.
85 ahallam 2606 In the following the upper index ${(n)}$ refers to a value at time $t^{(n)}$. Now when comparing \ref{eqn:hdgenf} with \ref{eqn:commonform} it can be seen that;
86 ahallam 2494 \begin{equation}
87     A = \kappa; D = \frac{\rho c \hackscore{p}}{h}; f = q \hackscore{H} + \frac{\rho c\hackscore p}{h} T^{(n-1)}
88     \end{equation}
89    
90 ahallam 2606 Now that the general form has been established, it can be submitted to \ESCRIPT. Note that it is necessary to establish the state of our system at time zero or $T^{(n=0)}$. This is due to the time derivative approximation we have used from \ref{eqn:Tbeuler}. Our model stipulates a starting temperature in the iron bar of 0\textcelsius. Thus the temperature distribution is simply;
91 ahallam 2495 \begin{equation}
92     T(x,0) = T\hackscore{ref} = 0
93     \end{equation}
94     for all $x$ in the domain.
95 ahallam 2494
96 ahallam 2495 \subsection{Boundary Conditions}
97 ahallam 2606 With the PDE sufficiently modified, consideration must now be given to the boundary conditions of our model. Typically there are two main types of boundary conditions known as Neumann and Dirichlet\footnote{More information on Boundary Conditions is available at Wikipedia \url{http://en.wikipedia.org/wiki/Boundary_conditions}}. In this example, we have utilised both conditions. Dirichlet is conceptually simpler and is used to prescribe a known value to the model on its boundary. This is like holding a snake by the tail; we know where the tail will be as we hold it however, we have no control over the rest of the snake. Dirichlet boundary conditions exist where we have applied our heat source. As the heat source is a constant, we can simulate its presence on that boundary. This is done by continuously resetting the temperature of the boundary, so that is is the same as the heat source.
98 ahallam 2495
99 ahallam 2606 Neumann boundary conditions describe the radiation or flux normal to the surface. This aptly describes our insulation conditions as we do not want to exert a constant temperature as with the heat source. However, we do want to prevent any loss of energy from the system. These natural boundary conditions can be described by specifying a radiation condition which prescribes the normal component of the flux $\kappa T\hackscore{,i}$ to be proportional
100 ahallam 2495 to the difference of the current temperature to the surrounding temperature $T\hackscore{ref}$;
101 ahallam 2494 \begin{equation}
102 ahallam 2495 \kappa T\hackscore{,i} n\hackscore i = \eta (T\hackscore{ref}-T)
103     \label{eqn:hdbc}
104 ahallam 2494 \end{equation}
105 ahallam 2606 where $\eta$ is a given material coefficient depending on the material of the block and the surrounding medium and $n\hackscore i$ is the $i$-th component of the outer normal field \index{outer normal field} at the surface of the domain. These two conditions form a boundary value problem that has to be solved for each time step. Due to the perfect insulation in our model $\eta = 0$ which results in zero flux - no energy in or out - we do not need to worry about the Neumann terms of the general form for this example.
106 ahallam 2494
107 ahallam 2495 \subsection{A \textit{1D} Clarification}
108 ahallam 2606 It is necessary for clarification that we revisit the general PDE from \refeq{eqn:commonform nabla} under the light of a two dimensional domain. \ESCRIPT is inherently designed to solve problems that are greater than one dimension and so \ref{eqn:commonform nabla} needs to be read as a higher dimensional problem. In the case of two spatial dimensions the \textit{Nabla operator} has in fact two components $\nabla = (\frac{\partial}{\partial x}, \frac{\partial}{\partial y})$. In full \ref{eqn:commonform nabla} assuming a constant coefficient $A$ takes the form;
109 gross 2477 \begin{equation}\label{eqn:commonform2D}
110     -A\hackscore{00}\frac{\partial^{2}u}{\partial x^{2}}
111     -A\hackscore{01}\frac{\partial^{2}u}{\partial x\partial y}
112     -A\hackscore{10}\frac{\partial^{2}u}{\partial y\partial x}
113     -A\hackscore{11}\frac{\partial^{2}u}{\partial y^{2}}
114     + Du = f
115     \end{equation}
116 ahallam 2606 Notice that for the higher dimensional case $A$ becomes a matrix. It is also
117 ahallam 2495 important to notice that the usage of the Nabla operator creates
118     a compact formulation which is also independent from the spatial dimension.
119 gross 2477 So to make the general PDE~\ref{eqn:commonform2D} one dimensional as
120     shown in~\ref{eqn:commonform} we need to set
121 ahallam 2606 \begin{equation}
122 ahallam 2494 A\hackscore{00}=A; A\hackscore{01}=A\hackscore{10}=A\hackscore{11}=0
123 gross 2477 \end{equation}
124    
125 ahallam 2495 \subsection{Developing a PDE Solution Script}
126     To solve \ref{eqn:hd} we will write a simple python script which uses the \modescript, \modfinley and \modmpl modules. At this point we assume that you have some basic understanding of the python programming language. If not there are some pointers and links available in Section \ref{sec:escpybas} .
127 gross 2477
128 ahallam 2495 Our goal here is to develop a script for \ESCRIPT that will solve the heat equation at successive time steps for a predefined period using our general form \ref{eqn:hdgenf}. Firstly it is necessary to import all the libraries\footnote{The libraries contain predefined scripts that are required to solve certain problems, these can be simple like sin and cos functions or more complicated like those from our \ESCRIPT library.}
129     that we will require.
130 gross 2477 \begin{verbatim}
131 ahallam 2495 from esys.escript import *
132 ahallam 2606 # This defines the LinearPDE module as LinearPDE
133     from esys.escript.linearPDEs import LinearPDE
134     # This imports the rectangle domain function from finley.
135     from esys.finley import Rectangle
136     # A useful unit handling package which will make sure all our units
137     # match up in the equations under SI.
138     from esys.escript.unitsSI import *
139     import pylab as pl #Plotting package.
140     import numpy as np #Array package.
141     import os #This package is necessary to handle saving our data.
142 gross 2477 \end{verbatim}
143 ahallam 2606 It is generally a good idea to import all of the \modescript library, although if you know the packages you need you can specify them individually. The function \verb|LinearPDE| has been imported for ease of use later in the script. \verb|Rectangle| is going to be our type of domain. The package \verb unitsSI is a module of \esc that provides support for units definitions with our variables; and the \verb|os| package is needed to handle file outputs once our PDE has been solved. \verb pylab and \verb numpy are modules developed independently of \esc. They are used because they have efficient plotting and array handling capabilities.
144 gross 2477
145 ahallam 2495 Once our library dependencies have been established, defining the problem specific variables is the next step. In general the number of variables needed will vary between problems. These variables belong to two categories. They are either directly related to the PDE and can be used as inputs into the \ESCRIPT solver, or they are script variables used to control internal functions and iterations in our problem. For this PDE there are a number of constants which will need values. Firstly, the domain upon which we wish to solve our problem needs to be defined. There are many different types of domains in \modescript which we will demonstrate in later tutorials but for our iron rod, we will simply use a rectangular domain.
146 ahallam 2401
147 ahallam 2495 Using a rectangular domain simplifies our rod which would probably be a \textit{3D} object into a single dimension. The iron rod will have a lengthways cross section that looks like a rectangle. As a result we do not need to model the volume of the rod because a cylinder is symmetrical about its centre. There are four arguments we must consider when we decide to create a rectangular domain, the model \textit{length}, \textit{width} and \textit{step size} in each direction. When defining the size of our problem it will help us determine appropriate values for our domain arguments. If we make our dimensions large but our step sizes very small we will to a point, increase the accuracy of our solution. Unfortunately we also increase the number of calculations that must be solved per time step. This means more computational time is required to produce a solution. In our \textit{1D} problem we will define our bar as being 1 metre long. An appropriate \verb|ndx| would be 1 to 10\% of the length. Our \verb|ndy| need only be 1, This is because our problem stipulates no partial derivatives in the $y$ direction so the temperature does not vary with $y$. Thus the domain parameters can be defined as follows; note we have used the \verb unitsSI convention to make sure all our input units are converted to SI.
148     \begin{verbatim}
149     #Domain related.
150 ahallam 2606 mx = 1*m #meters - model length
151 ahallam 2495 my = .1*m #meters - model width
152 ahallam 2606 ndx = 100 # mesh steps in x direction
153     ndy = 1 # mesh steps in y direction - one dimension means one element
154 ahallam 2495 \end{verbatim}
155     The material constants and the temperature variables must also be defined. For the iron rod in the model they are defined as:
156     \begin{verbatim}
157     #PDE related
158     q=200. * Celsius #Kelvin - our heat source temperature
159 ahallam 2606 Tref = 0. * Celsius #Kelvin - starting temp of iron bar
160 ahallam 2495 rho = 7874. *kg/m**3 #kg/m^{3} density of iron
161 ahallam 2606 cp = 449.*J/(kg*K) #j/Kg.K thermal capacity
162 ahallam 2495 rhocp = rho*cp
163 ahallam 2606 kappa = 80.*W/m/K #watts/m.Kthermal conductivity
164 ahallam 2495 \end{verbatim}
165     Finally, to control our script we will have to specify our timing controls and where we would like to save the output from the solver. This is simple enough:
166     \begin{verbatim}
167     t=0 #our start time, usually zero
168 ahallam 2606 tend=5.*minute #seconds - time to end simulation
169 ahallam 2495 outputs = 200 # number of time steps required.
170     h=(tend-t)/outputs #size of time step
171 ahallam 2606 #user warning statement
172     print "Expected Number of time outputs is: ", (tend-t)/h
173     i=0 #loop counter
174     #the folder to put our outputs in, leave blank "" for script path
175     save_path="data/onedheatdiff001"
176 ahallam 2495 \end{verbatim}
177 ahallam 2606 Now that we know our inputs we will build a domain using the \verb Rectangle() function from \verb finley . The four arguments allow us to define our domain \verb rod as:
178 ahallam 2495 \begin{verbatim}
179 ahallam 2606 #generate domain using rectangle
180     rod = Rectangle(l0=mx,l1=my,n0=ndx, n1=ndy)
181 ahallam 2495 \end{verbatim}
182 ahallam 2606 In this form \verb rod does not represent any discrete points, but rather an area of \verb ndx*ndy cells that fit into a rectangular space with opposing vertices at the origin and the point \verb [mx,my] . Our domain is constructed this way to allow the user to determine where the discrete points of each model will be located. Discretisation may be at the corners of each cell, the middle point of a cell, halfway along each side of the cell and so on. Depending on the PDE or the model there may be advantages and disadvantages for each case. Fortunately \modescript offers an easy way to extract finite points from the domain \verb|rod| using the domain property function \verb|getX()| . This function sets the vertices of each cell as finite points to solve in the solution. If we let \verb|x| be these finite points, then;
183 ahallam 2495 \begin{verbatim}
184 ahallam 2606 #extract finite points - the solution points
185     x=rod.getX()
186 ahallam 2495 \end{verbatim}
187     With a domain and all our required variables established, it is now possible to set up our PDE so that it can be solved by \ESCRIPT. The first step is to define the type of PDE that we are trying to solve in each time step. In this example it is a single linear PDE\footnote{in comparison to a system of PDEs which will be discussed later.}. We also need to state the values of our general form variables.
188     \begin{verbatim}
189     mypde=LinearSinglePDE(rod)
190     mypde.setValue(A=kappa*kronecker(rod),D=rhocp/h)
191     \end{verbatim}
192 ahallam 2401
193 ahallam 2495 In a few special cases it may be possible to decrease the computational time of the solver if our PDE is symmetric. Symmetry of a PDE is defined by;
194     \begin{equation}\label{eqn:symm}
195     A\hackscore{jl}=A\hackscore{lj}
196     \end{equation}
197 ahallam 2606 Symmetry is only dependent on the $A$ coefficient in the general form and the others $D$ and $d$ as well as the RHS coefficients $Y$ and $y$ may take any value. From the above definition we can see that our PDE is symmetric. The \verb LinearPDE class provides the method \method{checkSymmetry} to check if the given PDE is symmetric. As our PDE is symmetrical we will enable symmetry via;
198 ahallam 2495 \begin{verbatim}
199     myPDE.setSymmetryOn()
200     \end{verbatim}
201 ahallam 2401
202 ahallam 2495 We now need to specify our boundary conditions and initial values. The initial values required to solve this PDE are temperatures for each discrete point in our domain. We will set our bar to:
203 ahallam 2401 \begin{verbatim}
204     T = Tref
205     \end{verbatim}
206 ahallam 2606 Boundary conditions are a little more difficult. Fortunately the escript solver will handle our insulated boundary conditions by default with a zero flux operator. However, we will need to apply our heat source $q_{H}$ to the end of the bar at $x=0$ . \ESCRIPT makes this easy by letting us define areas in our domain. The finite points in the domain were previously defined as \verb x and it is possible to set all of points that satisfy $x=0$ to \verb q via the \verb whereZero() function. There are a few \verb where functions available in \ESCRIPT. They will return a value \verb 1 where they are satisfied and \verb 0 where they are not. In this case our \verb qH is only applied to the far LHS of our model as required.
207 ahallam 2495 \begin{verbatim}
208     # ... set heat source: ....
209     qH=q*whereZero(x[0])
210     \end{verbatim}
211 ahallam 2401
212 ahallam 2606 Finally we will initialise an iteration loop to solve our PDE for all the time steps we specified in the variable section. As the RHS of the general form is dependent on the previous values for temperature \verb T across the bar this must be updated in the loop. Our output at each timestep is \verb T the heat distribution and \verb totT the total heat in the system.
213 ahallam 2495 \begin{verbatim}
214     while t<=tend:
215 ahallam 2606 i+=1 #increment the counter
216     t+=h #increment the current time
217     mypde.setValue(Y=qH+rhocp/h*T) #set variable PDE coefficients
218     T=mypde.getSolution() #get the PDE solution
219     totT = rhocp*T #get the total heat solution in the system
220 ahallam 2495 \end{verbatim}
221 ahallam 2401
222 ahallam 2606 \subsection{Plotting the heat solutions}
223     Visualisation of the solution can be achieved using \mpl a module contained with \pylab. We start by modifying our solution script from before. Prior to the \verb while loop we will need to extract our finite solution points to a data object that is compatible with \mpl. First it is necessary to convert \verb x to a list of tuples. These are then converted to a \numpy array and the $x$ locations extracted via an array slice to the variable \verb plx .
224     \begin{verbatim}
225     #convert solution points for plotting
226     plx = x.toListOfTuples()
227     plx = np.array(plx) #convert to tuple to numpy array
228     plx = plx[:,0] #extract x locations
229     \end{verbatim}
230     As there are two solution outputs, we will generate two plots and save each to a file for every time step in the solution. The following is appended to the end of the \verb while loop and creates two figures. The first figure is for the temperature distribution, and the second the total temperature in the bar. Both cases are similar with a few minor changes for scale and labeling. We start by converting the solution to a tuple and then plotting this against our \textit{x coordinates} \verb plx from before. The axis is then standardised and a title applied. The figure is then saved to a *.png file and cleared for the following iteration.
231     \begin{verbatim}
232     #establish figure 1 for temperature vs x plots
233     tempT = T.toListOfTuples(scalarastuple=False)
234     pl.figure(1) #current figure
235     pl.plot(plx,tempT) #plot solution
236     #define axis extents and title
237     pl.axis([0,1.0,273.14990+0.00008,0.004+273.1499])
238     pl.title("Temperature accross Rod")
239     #save figure to file
240     pl.savefig(os.path.join(save_path+"/tempT","rodpyplot%03d.png") %i)
241     pl.clf() #clear figure
242    
243     #establish figure 2 for total temperature vs x plots and repeat
244     tottempT = totT.toListOfTuples(scalarastuple=False)
245     pl.figure(2)
246     pl.plot(plx,tottempT)
247     pl.axis([0,1.0,9.657E08,12000+9.657E08])
248     pl.title("Total temperature accross Rod")
249     pl.savefig(os.path.join(save_path+"/totT","ttrodpyplot%03d.png")%i)
250     pl.clf()
251     \end{verbatim}
252     \subsection{Make a video}
253     Our saved plots from the previous section can be cast into a video using the following command appended to the end of the script. \verb mencoder is linux only however, and other platform users will need to use an alternative video encoder.
254     \begin{verbatim}
255     # compile the *.png files to create two *.avi videos that show T change
256     # with time. This opperation uses linux mencoder. For other operating
257     # systems it is possible to use your favourite video compiler to
258     # convert image files to videos.
259 gross 2477
260 ahallam 2606 os.system("mencoder mf://"+save_path+"/tempT"+"/*.png -mf type=png:\
261     w=800:h=600:fps=25 -ovc lavc -lavcopts vcodec=mpeg4 -oac copy -o \
262     onedheatdiff001tempT.avi")
263 gross 2477
264 ahallam 2606 os.system("mencoder mf://"+save_path+"/totT"+"/*.png -mf type=png:\
265     w=800:h=600:fps=25 -ovc lavc -lavcopts vcodec=mpeg4 -oac copy -o \
266     onedheatdiff001totT.avi")
267     \end{verbatim}
268 gross 2477

  ViewVC Help
Powered by ViewVC 1.1.26