/[escript]/trunk/doc/user/faultsystem.tex
ViewVC logotype

Annotation of /trunk/doc/user/faultsystem.tex

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2647 - (hide annotations)
Fri Sep 4 05:25:25 2009 UTC (10 years, 2 months ago) by gross
File MIME type: application/x-tex
File size: 8687 byte(s)
fault system add. There is still an example for the usage missing.
1 gross 2647 \begin{figure}
2     \includegraphics[width=\textwidth]{figures/FaultSystem2D}
3     \caption{\label{FAULTSYSTEM2D}Two dimensional fault system with one fault named `t` in the $(x\hackscore{0},x\hackscore{1})$ and its parametrization in the
4     $w\hackscore{0}$ space. The fault has three segments.}
5     \end{figure}
6    
7     \section{Fault System}
8     The \class{FaultSystem} is an easy to use interface to handle 2D and 3D fault systems \index{faults} as used for instance in simulating fault ruptures. The main purpose of the class is to provide a parametrization of an individual fault in the system of fault. In case of a 2D fault the fault is parametrized by a single value $w\hackscore{0}$ and in the case of a 3D fault two parameters $w\hackscore{0}$ and $w\hackscore{1}$ are used. Thsi parametrization can be used
9     to impose data (e.g. a slip distribution) onto the fault. It can also be a useful tool to visualize or analyse the results on the fault if the fault is not straight.
10    
11     A fault $t$ in the fault system is represented by two polygons $(V^{ti})$ and $(v^{ti})$
12     defining the top and bottom line of the fault $t$.
13     $V^{ti}$ defines the $i$-th fault vertex at the top of the fault (typically at the surface of the Earth) and
14     $v^{ti}$ defines the $i$-th fault vertex at the bottom of the fault. Both polygons need to contain the same number of
15     vertices. For the 2D case the polygon $(v^{ti})$ for the bottom edge of the fault is dropped.
16     The patch with the vertices
17     $V^{t(i-1)}$, $V^{ti}$
18     $v^{t(i-1)}$, and $v^{ti}$
19     is called the $i$-th segment of the fault `t`. In 2D the the line with the start point $V^{t(i-1)}$
20     and the end point $V^{ti}$ is called the $i$-th segment, see Figure~\ref{FAULTSYSTEM2D}.
21    
22     In general a fault does not define a plane surface (or a straight line in 2D). In order to simplify working on
23     a fault in a fault system a parametrization $P^t: (w\hackscore{0},w\hackscore{1}) \rightarrow (x\hackscore{0},x\hackscore{1},x\hackscore{2})$ over a rectangular domain is introduced such that
24     \begin{equation}
25     0\le w\hackscore{0} \le w^t\hackscore{0 max} \mbox{ and } -w^t\hackscore{1max}\le w\hackscore{1} \le 0
26     \label{eq:fault 1}
27     \end{equation}
28     with positive if numbers $w^t\hackscore{0 max}$ and $w^t\hackscore{1 max}$. Typically one chooses
29     $w^t\hackscore{0 max}$ to be the unrolled length of the fault
30     $w^t\hackscore{1 max}$ to be the mean value of segment depth. Moreover we have
31     \begin{equation}
32     P^t(W^{ti})=V^{ti}\mbox{ and } P^t(w^{ti})=v^{ti}\
33     \label{eq:fault 2}
34     \end{equation}
35     where
36     \begin{equation}
37     W^{ti}=(d^{ti},0) \mbox{ and } w^{ti}=(d^{ti},-w^t\hackscore{1 max})
38     \label{eq:fault 3}
39     \end{equation}
40     and $d^{ti}$ is the unrolled distance of $W^{ti}$ from $W^{t0}$. In the 2D case $w^t\hackscore{1 max}$ is set to zero and therefore the second component is dropped, see Figure~\ref{FAULTSYSTEM2D}.
41    
42     In the case of 2D the parametrization $P^t$ is constructed as follows:
43     The line connecting $V^{t(i-1)}$ and $V^{ti}$ is given by
44     \begin{equation}
45     x=V^{t(i-1)} + s \cdot (V^{ti}-V^{t(i-1)})
46     \label{eq:2D line 1}
47     \end{equation}
48     where $s$ is between $0$ and $1$. The point $x$ is on $i$-th fault segement if and only if
49     such an $s$ esxists. If assume $x$ is on the fault one can calculate $s$ as
50     \begin{equation}
51     s = \frac{ (x- V^{t(i-1)})^t \cdot (V^{ti}-V^{t(i-1)}) }{\|V^{ti}-V^{t(i-1)}\|^2}
52     \label{eq:2D line 1b}
53     \end{equation}
54     We then can set
55     \begin{equation}
56     w\hackscore{0}=d^{ti}+s \cdot (d^{ti}-d^{t(i-1)})
57     \label{eq:2D line 2}
58     \end{equation}
59     to get $P^t(w\hackscore{0})=x$.
60     It remains the question if the given $x$ is actual on the segment $i$ of fault $t$. To test this $s$ is restricted
61     between $0$ and $1$ (so if $s<0$ $s$ is set to $0$ and if $s>1$ $s$ is set to $1$) and the we check the
62     residual of equation~\ref{eq:2D line 1}, ie. $x$ is been accepted to be in the segement if
63     \begin{equation}
64     \|x-V^{t(i-1)} - s \cdot (V^{ti}-V^{t(i-1)}) \| \le tol \cdot max(\|V^{ti}-V^{t(i-1)}\|, \|x-V^{t(i-1)} \|)
65     \label{eq:2D line 3}
66     \end{equation}
67     where $tol$ is a given tolerance.
68    
69     ADD DISCRIPTION FOR 3D case.
70    
71     \subsection{Functions}
72    
73     \begin{classdesc}{FaultSystem}{
74     \optional{dim =3}}
75     Creates a fault system in the \var{dim} dimensional space.
76     \end{classdesc}
77    
78    
79    
80     \begin{methoddesc}[FaultSystem]{getDim}{}
81     returns the spatial dimension
82     \end{methoddesc}
83     \begin{methoddesc}[FaultSystem]{getLength}{tag}
84     returns the unrolled length of fault \var{tag}.
85     \end{methoddesc}
86    
87     \begin{methoddesc}[FaultSystem]{getDepth}{tag}
88     returns the medium depth of fault \var{tag}.
89     \end{methoddesc}
90    
91     \begin{methoddesc}[FaultSystem]{getTags}{}
92     returns a list of the tags used by the fault system
93     \end{methoddesc}
94    
95     \begin{methoddesc}[FaultSystem]{getW0Range}{tag}
96     returns the range of the parameterization in $w\hackscore{0}$.
97     For tag $t$ this is the pair $(d^{t0},d^{tn})$ where $n$ is the number of segments in the fault.
98     In most cases one has $(d^{t0},d^{tn})=(0,w^t\hackscore{0 max})$.
99     \end{methoddesc}
100    
101     \begin{methoddesc}[FaultSystem]{getW1Range}{tag}
102     returns the range of the parameterization in $w\hackscore{1}$.
103     For tag $t$ this is the pair $(-w^t\hackscore{1max},0)$.
104     \end{methoddesc}
105    
106     \begin{methoddesc}[FaultSystem]{getW0Offsets}{tag}
107     returns the offsets for the parametrization of fault \var{tag}.
108     For tag \var{tag}=$t$ this is the list $[d^{ti}]$.
109     \end{methoddesc}
110    
111    
112     \begin{methoddesc}[FaultSystem]{getFaultSegments}{tag}
113     returns the polygons used to describe fault \var{tag}. For \var{tag}=$t$ this is the list of the vertices
114     $[V^{ti}]$ for the 2D and the pair of lists of the top vertices $[V^{ti}]$ and the bottom vertices $[v^{ti}]$ in 3D.
115     Note that the coordinates are represented as \numpyNDA objects.
116     \end{methoddesc}
117    
118     \begin{methoddesc}[FaultSystem]{getCenterOnSurface}{}
119     returns the center point of the fault system at the surfaces. In 3D the calculation of the center is
120     considering the top edge of the faults and projects the edge to the surface (the $x\hackscore{2}$ component is assumed to be 0}. An \numpyNDA object is returned.
121     \end{methoddesc}
122    
123     \begin{methoddesc}[FaultSystem]{getOrientationOnSurface}{}
124     returns the orientation of the fault system in RAD on the surface ($x\hackscore{2}=0$ plane) around the fault system center.
125     \end{methoddesc}
126     \begin{methoddesc}[FaultSystem]{transform}{\optional{rot=0, \optional{shift=numpy.zeros((3,)}}}
127     applies a shift \var{shift} and a consecutive rotation in the $x\hackscore{2}=0$ plane.
128     \var{rot} is a float number and \var{shift} an \numpyNDA object.
129     \end{methoddesc}
130    
131     \begin{methoddesc}[FaultSystem]{addFault}{top, tag \optional{, bottom=None \optional{, w0_offsets=None\optional{, w1_max=None}}}}
132     adds the fault \var{tag} to the fault system.
133    
134     \var{top} is the list of the vertices defing the top of the fault
135     while \var{bottom} is the list of the vertices defing the bottom of the fault.
136     In the case of 2D \var{bottom} must not be present. Both list, if present, must have the same length.
137     \var{w1_max} defines the range of the $w\hackscore{1}$. If not present the mean value over the depth of
138     all segement edges in the fault is used.
139     \var{w0_offsets} sets the offsets $d^{ti}$. If not present it i schoosen such that $d^{ti}-d^{t(i-1)}$ is the length of the $i$-th segment. In some cases, eg. when kinks in the fault are relevant, it can be useful
140     to explicitly specify the offsets in order to simplify the signamnt of values.
141     \end{methoddesc}
142    
143     \begin{methoddesc}[FaultSystem]{getMaxValue}{f\optional{, tol=1.e-8}}
144     returns the maximum value of \var{f}, the fault wher the maximum is found and the location on the fault in fault coordinates. \var{f} must be a \Scalar. When the maximum is calculated only \DataSamplePoints are considered
145     which are on a fault in the fault system in the sense of condition~\label{eq:2D line 3} or \label{eq:3D line 3}, respectively. In the case no \DataSamplePoints is found the returned tag is \var{None} and
146     the maximum value as well as the location of the maximum value are undefined.
147     \end{methoddesc}
148    
149     \begin{methoddesc}[FaultSystem]{getParametrization}{x,tag \optional{\optional{, tol=1.e-8}, outsider=None}}
150     resturns the argument $w$ of the parameterization $P^t$ for \var{tag}=$t$ to provide \var{x}
151     together with a mask indicating where the given location if on a fault in the fault system by the value $1$ (otherwise the value is set to $0$). \var{x} needs to be \Vector or \numpyNDA object. \var{tol} defines the tolerance to decide if a given \DataSamplePoints is on fault \var{tag}. The value
152     \var{outside} is the value used as a replacement value for $w$ where the corresponding value in \var{x} is not
153     on a fault. If not \var{outside} is not present an appropriate value is used.
154     \end{methoddesc}
155    
156     \subsection{Example}
157     See section~\ref{Slip CHAP}
158    
159    
160    
161    
162    
163    
164    
165    

  ViewVC Help
Powered by ViewVC 1.1.26