/[escript]/trunk/finley/src/CPPAdapter/MeshAdapter.cpp
ViewVC logotype

Diff of /trunk/finley/src/CPPAdapter/MeshAdapter.cpp

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

trunk/esys2/finley/src/CPPAdapter/MeshAdapter.cpp revision 149 by jgs, Thu Sep 1 03:31:39 2005 UTC trunk/finley/src/CPPAdapter/MeshAdapter.cpp revision 2087 by jfenwick, Mon Nov 24 04:51:30 2008 UTC
# Line 1  Line 1 
 // $Id$  
 /*  
  ******************************************************************************  
  *                                                                            *  
  *       COPYRIGHT  ACcESS 2004 -  All Rights Reserved                        *  
  *                                                                            *  
  * This software is the property of ACcESS. No part of this code              *  
  * may be copied in any form or by any means without the expressed written    *  
  * consent of ACcESS.  Copying, use or modification of this software          *  
  * by any unauthorised person is illegal unless that person has a software    *  
  * license agreement with ACcESS.                                             *  
  *                                                                            *  
  ******************************************************************************  
 */  
 extern "C" {  
 #include "finley/finleyC/Finley.h"  
 #include "finley/finleyC/Assemble.h"  
 #include "finley/finleyC/Mesh.h"  
 #include "finley/finleyC/Finley.h"  
 #include "finley/finleyC/System.h"  
 }  
 #include "finley/CPPAdapter/SystemMatrixAdapter.h"  
 #include "finley/CPPAdapter/MeshAdapter.h"  
 #include "finley/CPPAdapter/FinleyError.h"  
 #include "finley/CPPAdapter/FinleyAdapterException.h"  
 #include "escript/Data/FunctionSpaceFactory.h"  
 #include "escript/Data/Data.h"  
 #include "escript/Data/DataArrayView.h"  
 #include "escript/Data/FunctionSpace.h"  
 #include "escript/Data/DataFactory.h"  
1    
2  #include <iostream>  /*******************************************************
3    *
4    * Copyright (c) 2003-2008 by University of Queensland
5    * Earth Systems Science Computational Center (ESSCC)
6    * http://www.uq.edu.au/esscc
7    *
8    * Primary Business: Queensland, Australia
9    * Licensed under the Open Software License version 3.0
10    * http://www.opensource.org/licenses/osl-3.0.php
11    *
12    *******************************************************/
13    
14    
15    #include "MeshAdapter.h"
16    #include "escript/Data.h"
17    #include "escript/DataFactory.h"
18    #ifdef USE_NETCDF
19    #include <netcdfcpp.h>
20    #endif
21    #ifdef PASO_MPI
22    #include <mpi.h>
23    #include "paso/Paso_MPI.h"
24    #endif
25    extern "C" {
26    #include "esysUtils/blocktimer.h"
27    }
28  #include <vector>  #include <vector>
29  #include <sstream>  
30    #define IS_THERE_A_REASON_FOR_THIS_MAGIC_NAME_LENGTH  256
31    
32  using namespace std;  using namespace std;
33  using namespace escript;  using namespace escript;
# Line 44  MeshAdapter::FunctionSpaceNamesMapType M Line 40  MeshAdapter::FunctionSpaceNamesMapType M
40  const int MeshAdapter::DegreesOfFreedom=FINLEY_DEGREES_OF_FREEDOM;  const int MeshAdapter::DegreesOfFreedom=FINLEY_DEGREES_OF_FREEDOM;
41  const int MeshAdapter::ReducedDegreesOfFreedom=FINLEY_REDUCED_DEGREES_OF_FREEDOM;  const int MeshAdapter::ReducedDegreesOfFreedom=FINLEY_REDUCED_DEGREES_OF_FREEDOM;
42  const int MeshAdapter::Nodes=FINLEY_NODES;  const int MeshAdapter::Nodes=FINLEY_NODES;
43    const int MeshAdapter::ReducedNodes=FINLEY_REDUCED_NODES;
44  const int MeshAdapter::Elements=FINLEY_ELEMENTS;  const int MeshAdapter::Elements=FINLEY_ELEMENTS;
45    const int MeshAdapter::ReducedElements=FINLEY_REDUCED_ELEMENTS;
46  const int MeshAdapter::FaceElements=FINLEY_FACE_ELEMENTS;  const int MeshAdapter::FaceElements=FINLEY_FACE_ELEMENTS;
47    const int MeshAdapter::ReducedFaceElements=FINLEY_REDUCED_FACE_ELEMENTS;
48  const int MeshAdapter::Points=FINLEY_POINTS;  const int MeshAdapter::Points=FINLEY_POINTS;
49  const int MeshAdapter::ContactElementsZero=FINLEY_CONTACT_ELEMENTS_1;  const int MeshAdapter::ContactElementsZero=FINLEY_CONTACT_ELEMENTS_1;
50    const int MeshAdapter::ReducedContactElementsZero=FINLEY_REDUCED_CONTACT_ELEMENTS_1;
51  const int MeshAdapter::ContactElementsOne=FINLEY_CONTACT_ELEMENTS_2;  const int MeshAdapter::ContactElementsOne=FINLEY_CONTACT_ELEMENTS_2;
52    const int MeshAdapter::ReducedContactElementsOne=FINLEY_REDUCED_CONTACT_ELEMENTS_2;
53    
54  MeshAdapter::MeshAdapter(Finley_Mesh* finleyMesh)  MeshAdapter::MeshAdapter(Finley_Mesh* finleyMesh)
55  {  {
56    setFunctionSpaceTypeNames();     setFunctionSpaceTypeNames();
57    //     //
58    // need to use a null_deleter as Finley_Mesh_dealloc deletes the pointer     // need to use a null_deleter as Finley_Mesh_free deletes the pointer
59    // for us.     // for us.
60    m_finleyMesh.reset(finleyMesh,null_deleter());     m_finleyMesh.reset(finleyMesh,null_deleter());
61  }  }
62    
63  //  //
# Line 64  MeshAdapter::MeshAdapter(Finley_Mesh* fi Line 65  MeshAdapter::MeshAdapter(Finley_Mesh* fi
65  MeshAdapter::MeshAdapter(const MeshAdapter& in):  MeshAdapter::MeshAdapter(const MeshAdapter& in):
66  m_finleyMesh(in.m_finleyMesh)  m_finleyMesh(in.m_finleyMesh)
67  {  {
68    setFunctionSpaceTypeNames();     setFunctionSpaceTypeNames();
69  }  }
70    
71  MeshAdapter::~MeshAdapter()  MeshAdapter::~MeshAdapter()
72  {  {
73    //     //
74    // I hope the case for the pointer being zero has been taken care of.     // I hope the case for the pointer being zero has been taken care of.
75    //  cout << "In MeshAdapter destructor." << endl;     //  cout << "In MeshAdapter destructor." << endl;
76    if (m_finleyMesh.unique()) {     if (m_finleyMesh.unique()) {
77      //   cout << "Calling dealloc." << endl;        Finley_Mesh_free(m_finleyMesh.get());
78      Finley_Mesh_dealloc(m_finleyMesh.get());     }
79      //   cout << "Finished dealloc." << endl;  }
80    }  
81    int MeshAdapter::getMPISize() const
82    {
83       return m_finleyMesh.get()->MPIInfo->size;
84  }  }
85    int MeshAdapter::getMPIRank() const
86    {
87       return m_finleyMesh.get()->MPIInfo->rank;
88    }
89    void MeshAdapter::MPIBarrier() const
90    {
91    #ifdef PASO_MPI
92       MPI_Barrier(m_finleyMesh.get()->MPIInfo->comm);
93    #endif
94       return;
95    }
96    bool MeshAdapter::onMasterProcessor() const
97    {
98       return m_finleyMesh.get()->MPIInfo->rank == 0;
99    }
100    
101    
102  Finley_Mesh* MeshAdapter::getFinley_Mesh() const {  Finley_Mesh* MeshAdapter::getFinley_Mesh() const {
103     return m_finleyMesh.get();     return m_finleyMesh.get();
# Line 85  Finley_Mesh* MeshAdapter::getFinley_Mesh Line 105  Finley_Mesh* MeshAdapter::getFinley_Mesh
105    
106  void MeshAdapter::write(const std::string& fileName) const  void MeshAdapter::write(const std::string& fileName) const
107  {  {
108    char fName[fileName.size()+1];     char *fName = (fileName.size()+1>0) ? TMPMEMALLOC(fileName.size()+1,char) : (char*)NULL;
109    strcpy(fName,fileName.c_str());     strcpy(fName,fileName.c_str());
110    Finley_Mesh_write(m_finleyMesh.get(),fName);     Finley_Mesh_write(m_finleyMesh.get(),fName);
111    checkFinleyError();     checkFinleyError();
112       TMPMEMFREE(fName);
113    }
114    
115    void MeshAdapter::Print_Mesh_Info(const bool full=false) const
116    {
117       Finley_PrintMesh_Info(m_finleyMesh.get(), full);
118  }  }
119    
120  // void MeshAdapter::getTagList(int functionSpaceType,  void MeshAdapter::dump(const std::string& fileName) const
121  //                  int* numTags) const  {
122  // {  #ifdef USE_NETCDF
123  //   Finley_Mesh_tagList(m_finleyMesh.get(),functionSpaceType,tagList,numTags);     const NcDim* ncdims[12] = {NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL};
124  //   return;     NcVar *ids;
125  // }     int *int_ptr;
126       Finley_Mesh *mesh = m_finleyMesh.get();
127       Finley_TagMap* tag_map;
128       int num_Tags = 0;
129       int mpi_size             = mesh->MPIInfo->size;
130       int mpi_rank             = mesh->MPIInfo->rank;
131       int numDim               = mesh->Nodes->numDim;
132       int numNodes             = mesh->Nodes->numNodes;
133       int num_Elements         = mesh->Elements->numElements;
134       int num_FaceElements         = mesh->FaceElements->numElements;
135       int num_ContactElements      = mesh->ContactElements->numElements;
136       int num_Points           = mesh->Points->numElements;
137       int num_Elements_numNodes        = mesh->Elements->numNodes;
138       int num_FaceElements_numNodes    = mesh->FaceElements->numNodes;
139       int num_ContactElements_numNodes = mesh->ContactElements->numNodes;
140    #ifdef PASO_MPI
141       MPI_Status status;
142    #endif
143    
144    /* Incoming token indicates it's my turn to write */
145    #ifdef PASO_MPI
146       if (mpi_rank>0) MPI_Recv(&num_Tags, 0, MPI_INT, mpi_rank-1, 81800, mesh->MPIInfo->comm, &status);
147    #endif
148    
149       char *newFileName = Paso_MPI_appendRankToFileName(fileName.c_str(),
150                                                         mpi_size, mpi_rank);
151    
152       /* Figure out how much storage is required for tags */
153       tag_map = mesh->TagMap;
154       num_Tags = 0;
155       if (tag_map) {
156          while (tag_map) {
157             num_Tags++;
158             tag_map=tag_map->next;
159          }
160       }
161    
162       // NetCDF error handler
163       NcError err(NcError::verbose_nonfatal);
164       // Create the file.
165       NcFile dataFile(newFileName, NcFile::Replace);
166       // check if writing was successful
167       if (!dataFile.is_valid())
168          throw DataException("Error - MeshAdapter::dump: opening of NetCDF file for output failed: " + *newFileName);
169    
170       // Define dimensions (num_Elements and dim_Elements are identical, dim_Elements only appears if > 0)
171       if (! (ncdims[0] = dataFile.add_dim("numNodes", numNodes)) )
172          throw DataException("Error - MeshAdapter::dump: appending dimension numNodes to netCDF file failed: " + *newFileName);
173       if (! (ncdims[1] = dataFile.add_dim("numDim", numDim)) )
174          throw DataException("Error - MeshAdapter::dump: appending dimension numDim to netCDF file failed: " + *newFileName);
175       if (! (ncdims[2] = dataFile.add_dim("mpi_size_plus_1", mpi_size+1)) )
176          throw DataException("Error - MeshAdapter::dump: appending dimension mpi_size to netCDF file failed: " + *newFileName);
177       if (num_Elements>0)
178          if (! (ncdims[3] = dataFile.add_dim("dim_Elements", num_Elements)) )
179             throw DataException("Error - MeshAdapter::dump: appending dimension dim_Elements to netCDF file failed: " + *newFileName);
180       if (num_FaceElements>0)
181          if (! (ncdims[4] = dataFile.add_dim("dim_FaceElements", num_FaceElements)) )
182             throw DataException("Error - MeshAdapter::dump: appending dimension dim_FaceElements to netCDF file failed: " + *newFileName);
183       if (num_ContactElements>0)
184          if (! (ncdims[5] = dataFile.add_dim("dim_ContactElements", num_ContactElements)) )
185             throw DataException("Error - MeshAdapter::dump: appending dimension dim_ContactElements to netCDF file failed: " + *newFileName);
186       if (num_Points>0)
187          if (! (ncdims[6] = dataFile.add_dim("dim_Points", num_Points)) )
188             throw DataException("Error - MeshAdapter::dump: appending dimension dim_Points to netCDF file failed: " + *newFileName);
189       if (num_Elements>0)
190          if (! (ncdims[7] = dataFile.add_dim("dim_Elements_Nodes", num_Elements_numNodes)) )
191             throw DataException("Error - MeshAdapter::dump: appending dimension dim_Elements_Nodes to netCDF file failed: " + *newFileName);
192       if (num_FaceElements>0)
193          if (! (ncdims[8] = dataFile.add_dim("dim_FaceElements_numNodes", num_FaceElements_numNodes)) )
194             throw DataException("Error - MeshAdapter::dump: appending dimension dim_FaceElements_numNodes to netCDF file failed: " + *newFileName);
195       if (num_ContactElements>0)
196          if (! (ncdims[9] = dataFile.add_dim("dim_ContactElements_numNodes", num_ContactElements_numNodes)) )
197             throw DataException("Error - MeshAdapter::dump: appending dimension dim_ContactElements_numNodes to netCDF file failed: " + *newFileName);
198       if (num_Tags>0)
199          if (! (ncdims[10] = dataFile.add_dim("dim_Tags", num_Tags)) )
200             throw DataException("Error - MeshAdapter::dump: appending dimension dim_Tags to netCDF file failed: " + *newFileName);
201    
202       // Attributes: MPI size, MPI rank, Name, order, reduced_order
203       if (!dataFile.add_att("mpi_size", mpi_size) )
204          throw DataException("Error - MeshAdapter::dump: appending mpi_size to NetCDF file failed: " + *newFileName);
205       if (!dataFile.add_att("mpi_rank", mpi_rank) )
206          throw DataException("Error - MeshAdapter::dump: appending mpi_rank to NetCDF file failed: " + *newFileName);
207       if (!dataFile.add_att("Name",mesh->Name) )
208          throw DataException("Error - MeshAdapter::dump: appending Name to NetCDF file failed: " + *newFileName);
209       if (!dataFile.add_att("numDim",numDim) )
210          throw DataException("Error - MeshAdapter::dump: appending order to NetCDF file failed: " + *newFileName);
211       if (!dataFile.add_att("order",mesh->order) )
212          throw DataException("Error - MeshAdapter::dump: appending order to NetCDF file failed: " + *newFileName);
213       if (!dataFile.add_att("reduced_order",mesh->reduced_order) )
214          throw DataException("Error - MeshAdapter::dump: appending reduced_order to NetCDF file failed: " + *newFileName);
215       if (!dataFile.add_att("numNodes",numNodes) )
216          throw DataException("Error - MeshAdapter::dump: appending numNodes to NetCDF file failed: " + *newFileName);
217       if (!dataFile.add_att("num_Elements",num_Elements) )
218          throw DataException("Error - MeshAdapter::dump: appending num_Elements to NetCDF file failed: " + *newFileName);
219       if (!dataFile.add_att("num_FaceElements",num_FaceElements) )
220          throw DataException("Error - MeshAdapter::dump: appending num_FaceElements to NetCDF file failed: " + *newFileName);
221       if (!dataFile.add_att("num_ContactElements",num_ContactElements) )
222          throw DataException("Error - MeshAdapter::dump: appending num_ContactElements to NetCDF file failed: " + *newFileName);
223       if (!dataFile.add_att("num_Points",num_Points) )
224          throw DataException("Error - MeshAdapter::dump: appending num_Points to NetCDF file failed: " + *newFileName);
225       if (!dataFile.add_att("num_Elements_numNodes",num_Elements_numNodes) )
226          throw DataException("Error - MeshAdapter::dump: appending num_Elements_numNodes to NetCDF file failed: " + *newFileName);
227       if (!dataFile.add_att("num_FaceElements_numNodes",num_FaceElements_numNodes) )
228          throw DataException("Error - MeshAdapter::dump: appending num_FaceElements_numNodes to NetCDF file failed: " + *newFileName);
229       if (!dataFile.add_att("num_ContactElements_numNodes",num_ContactElements_numNodes) )
230          throw DataException("Error - MeshAdapter::dump: appending num_ContactElements_numNodes to NetCDF file failed: " + *newFileName);
231       if (!dataFile.add_att("Elements_TypeId", mesh->Elements->ReferenceElement->Type->TypeId) )
232          throw DataException("Error - MeshAdapter::dump: appending Elements_TypeId to NetCDF file failed: " + *newFileName);
233       if (!dataFile.add_att("FaceElements_TypeId", mesh->FaceElements->ReferenceElement->Type->TypeId) )
234          throw DataException("Error - MeshAdapter::dump: appending FaceElements_TypeId to NetCDF file failed: " + *newFileName);
235       if (!dataFile.add_att("ContactElements_TypeId", mesh->ContactElements->ReferenceElement->Type->TypeId) )
236          throw DataException("Error - MeshAdapter::dump: appending ContactElements_TypeId to NetCDF file failed: " + *newFileName);
237       if (!dataFile.add_att("Points_TypeId", mesh->Points->ReferenceElement->Type->TypeId) )
238          throw DataException("Error - MeshAdapter::dump: appending Points_TypeId to NetCDF file failed: " + *newFileName);
239       if (!dataFile.add_att("num_Tags", num_Tags) )
240          throw DataException("Error - MeshAdapter::dump: appending num_Tags to NetCDF file failed: " + *newFileName);
241    
242       // // // // // Nodes // // // // //
243    
244       // Only write nodes if non-empty because NetCDF doesn't like empty arrays (it treats them as NC_UNLIMITED)
245       if (numNodes>0) {
246    
247          // Nodes Id
248          if (! ( ids = dataFile.add_var("Nodes_Id", ncInt, ncdims[0])) )
249             throw DataException("Error - MeshAdapter::dump: appending Nodes_Id to netCDF file failed: " + *newFileName);
250          int_ptr = &mesh->Nodes->Id[0];
251          if (! (ids->put(int_ptr, numNodes)) )
252             throw DataException("Error - MeshAdapter::dump: copy Nodes_Id to netCDF buffer failed: " + *newFileName);
253    
254          // Nodes Tag
255          if (! ( ids = dataFile.add_var("Nodes_Tag", ncInt, ncdims[0])) )
256             throw DataException("Error - MeshAdapter::dump: appending Nodes_Tag to netCDF file failed: " + *newFileName);
257          int_ptr = &mesh->Nodes->Tag[0];
258          if (! (ids->put(int_ptr, numNodes)) )
259             throw DataException("Error - MeshAdapter::dump: copy Nodes_Tag to netCDF buffer failed: " + *newFileName);
260    
261          // Nodes gDOF
262          if (! ( ids = dataFile.add_var("Nodes_gDOF", ncInt, ncdims[0])) )
263             throw DataException("Error - MeshAdapter::dump: appending Nodes_gDOF to netCDF file failed: " + *newFileName);
264          int_ptr = &mesh->Nodes->globalDegreesOfFreedom[0];
265          if (! (ids->put(int_ptr, numNodes)) )
266             throw DataException("Error - MeshAdapter::dump: copy Nodes_gDOF to netCDF buffer failed: " + *newFileName);
267    
268          // Nodes global node index
269          if (! ( ids = dataFile.add_var("Nodes_gNI", ncInt, ncdims[0])) )
270             throw DataException("Error - MeshAdapter::dump: appending Nodes_gNI to netCDF file failed: " + *newFileName);
271          int_ptr = &mesh->Nodes->globalNodesIndex[0];
272          if (! (ids->put(int_ptr, numNodes)) )
273             throw DataException("Error - MeshAdapter::dump: copy Nodes_gNI to netCDF buffer failed: " + *newFileName);
274    
275          // Nodes grDof
276          if (! ( ids = dataFile.add_var("Nodes_grDfI", ncInt, ncdims[0])) )
277             throw DataException("Error - MeshAdapter::dump: appending Nodes_grDfI to netCDF file failed: " + *newFileName);
278          int_ptr = &mesh->Nodes->globalReducedDOFIndex[0];
279          if (! (ids->put(int_ptr, numNodes)) )
280             throw DataException("Error - MeshAdapter::dump: copy Nodes_grDfI to netCDF buffer failed: " + *newFileName);
281    
282          // Nodes grNI
283          if (! ( ids = dataFile.add_var("Nodes_grNI", ncInt, ncdims[0])) )
284             throw DataException("Error - MeshAdapter::dump: appending Nodes_grNI to netCDF file failed: " + *newFileName);
285          int_ptr = &mesh->Nodes->globalReducedNodesIndex[0];
286          if (! (ids->put(int_ptr, numNodes)) )
287             throw DataException("Error - MeshAdapter::dump: copy Nodes_grNI to netCDF buffer failed: " + *newFileName);
288    
289          // Nodes Coordinates
290          if (! ( ids = dataFile.add_var("Nodes_Coordinates", ncDouble, ncdims[0], ncdims[1]) ) )
291             throw DataException("Error - MeshAdapter::dump: appending Nodes_Coordinates to netCDF file failed: " + *newFileName);
292          if (! (ids->put(&(mesh->Nodes->Coordinates[INDEX2(0,0,numDim)]), numNodes, numDim)) )
293             throw DataException("Error - MeshAdapter::dump: copy Nodes_Coordinates to netCDF buffer failed: " + *newFileName);
294    
295          // Nodes degreesOfFreedomDistribution
296          if (! ( ids = dataFile.add_var("Nodes_DofDistribution", ncInt, ncdims[2])) )
297             throw DataException("Error - MeshAdapter::dump: appending Nodes_DofDistribution to netCDF file failed: " + *newFileName);
298          int_ptr = &mesh->Nodes->degreesOfFreedomDistribution->first_component[0];
299          if (! (ids->put(int_ptr, mpi_size+1)) )
300             throw DataException("Error - MeshAdapter::dump: copy Nodes_DofDistribution to netCDF buffer failed: " + *newFileName);
301    
302          // Nodes nodeDistribution
303          if (! ( ids = dataFile.add_var("Nodes_NodeDistribution", ncInt, ncdims[2])) )
304             throw DataException("Error - MeshAdapter::dump: appending Nodes_NodeDistribution to netCDF file failed: " + *newFileName);
305          int_ptr = &mesh->Nodes->nodesDistribution->first_component[0];
306          if (! (ids->put(int_ptr, mpi_size+1)) )
307             throw DataException("Error - MeshAdapter::dump: copy Nodes_NodeDistribution to netCDF buffer failed: " + *newFileName);
308    
309       }
310    
311       // // // // // Elements // // // // //
312    
313       if (num_Elements>0) {
314    
315          // Elements_Id
316          if (! ( ids = dataFile.add_var("Elements_Id", ncInt, ncdims[3])) )
317             throw DataException("Error - MeshAdapter::dump: appending Elements_Id to netCDF file failed: " + *newFileName);
318          int_ptr = &mesh->Elements->Id[0];
319          if (! (ids->put(int_ptr, num_Elements)) )
320             throw DataException("Error - MeshAdapter::dump: copy Elements_Id to netCDF buffer failed: " + *newFileName);
321    
322          // Elements_Tag
323          if (! ( ids = dataFile.add_var("Elements_Tag", ncInt, ncdims[3])) )
324             throw DataException("Error - MeshAdapter::dump: appending Elements_Tag to netCDF file failed: " + *newFileName);
325          int_ptr = &mesh->Elements->Tag[0];
326          if (! (ids->put(int_ptr, num_Elements)) )
327             throw DataException("Error - MeshAdapter::dump: copy Elements_Tag to netCDF buffer failed: " + *newFileName);
328    
329          // Elements_Owner
330          if (! ( ids = dataFile.add_var("Elements_Owner", ncInt, ncdims[3])) )
331             throw DataException("Error - MeshAdapter::dump: appending Elements_Owner to netCDF file failed: " + *newFileName);
332          int_ptr = &mesh->Elements->Owner[0];
333          if (! (ids->put(int_ptr, num_Elements)) )
334             throw DataException("Error - MeshAdapter::dump: copy Elements_Owner to netCDF buffer failed: " + *newFileName);
335    
336          // Elements_Color
337          if (! ( ids = dataFile.add_var("Elements_Color", ncInt, ncdims[3])) )
338             throw DataException("Error - MeshAdapter::dump: appending Elements_Color to netCDF file failed: " + *newFileName);
339          int_ptr = &mesh->Elements->Color[0];
340          if (! (ids->put(int_ptr, num_Elements)) )
341             throw DataException("Error - MeshAdapter::dump: copy Elements_Color to netCDF buffer failed: " + *newFileName);
342    
343          // Elements_Nodes
344          if (! ( ids = dataFile.add_var("Elements_Nodes", ncInt, ncdims[3], ncdims[7]) ) )
345             throw DataException("Error - MeshAdapter::dump: appending Elements_Nodes to netCDF file failed: " + *newFileName);
346          if (! (ids->put(&(mesh->Elements->Nodes[0]), num_Elements, num_Elements_numNodes)) )
347             throw DataException("Error - MeshAdapter::dump: copy Elements_Nodes to netCDF buffer failed: " + *newFileName);
348    
349       }
350    
351       // // // // // Face_Elements // // // // //
352    
353       if (num_FaceElements>0) {
354    
355          // FaceElements_Id
356          if (! ( ids = dataFile.add_var("FaceElements_Id", ncInt, ncdims[4])) )
357             throw DataException("Error - MeshAdapter::dump: appending FaceElements_Id to netCDF file failed: " + *newFileName);
358          int_ptr = &mesh->FaceElements->Id[0];
359          if (! (ids->put(int_ptr, num_FaceElements)) )
360             throw DataException("Error - MeshAdapter::dump: copy FaceElements_Id to netCDF buffer failed: " + *newFileName);
361    
362          // FaceElements_Tag
363          if (! ( ids = dataFile.add_var("FaceElements_Tag", ncInt, ncdims[4])) )
364             throw DataException("Error - MeshAdapter::dump: appending FaceElements_Tag to netCDF file failed: " + *newFileName);
365          int_ptr = &mesh->FaceElements->Tag[0];
366          if (! (ids->put(int_ptr, num_FaceElements)) )
367             throw DataException("Error - MeshAdapter::dump: copy FaceElements_Tag to netCDF buffer failed: " + *newFileName);
368    
369          // FaceElements_Owner
370          if (! ( ids = dataFile.add_var("FaceElements_Owner", ncInt, ncdims[4])) )
371             throw DataException("Error - MeshAdapter::dump: appending FaceElements_Owner to netCDF file failed: " + *newFileName);
372          int_ptr = &mesh->FaceElements->Owner[0];
373          if (! (ids->put(int_ptr, num_FaceElements)) )
374             throw DataException("Error - MeshAdapter::dump: copy FaceElements_Owner to netCDF buffer failed: " + *newFileName);
375    
376          // FaceElements_Color
377          if (! ( ids = dataFile.add_var("FaceElements_Color", ncInt, ncdims[4])) )
378             throw DataException("Error - MeshAdapter::dump: appending FaceElements_Color to netCDF file failed: " + *newFileName);
379          int_ptr = &mesh->FaceElements->Color[0];
380          if (! (ids->put(int_ptr, num_FaceElements)) )
381             throw DataException("Error - MeshAdapter::dump: copy FaceElements_Color to netCDF buffer failed: " + *newFileName);
382    
383          // FaceElements_Nodes
384          if (! ( ids = dataFile.add_var("FaceElements_Nodes", ncInt, ncdims[4], ncdims[8]) ) )
385             throw DataException("Error - MeshAdapter::dump: appending FaceElements_Nodes to netCDF file failed: " + *newFileName);
386          if (! (ids->put(&(mesh->FaceElements->Nodes[0]), num_FaceElements, num_FaceElements_numNodes)) )
387             throw DataException("Error - MeshAdapter::dump: copy FaceElements_Nodes to netCDF buffer failed: " + *newFileName);
388    
389       }
390    
391       // // // // // Contact_Elements // // // // //
392    
393       if (num_ContactElements>0) {
394    
395          // ContactElements_Id
396          if (! ( ids = dataFile.add_var("ContactElements_Id", ncInt, ncdims[5])) )
397             throw DataException("Error - MeshAdapter::dump: appending ContactElements_Id to netCDF file failed: " + *newFileName);
398          int_ptr = &mesh->ContactElements->Id[0];
399          if (! (ids->put(int_ptr, num_ContactElements)) )
400             throw DataException("Error - MeshAdapter::dump: copy ContactElements_Id to netCDF buffer failed: " + *newFileName);
401    
402          // ContactElements_Tag
403          if (! ( ids = dataFile.add_var("ContactElements_Tag", ncInt, ncdims[5])) )
404             throw DataException("Error - MeshAdapter::dump: appending ContactElements_Tag to netCDF file failed: " + *newFileName);
405          int_ptr = &mesh->ContactElements->Tag[0];
406          if (! (ids->put(int_ptr, num_ContactElements)) )
407             throw DataException("Error - MeshAdapter::dump: copy ContactElements_Tag to netCDF buffer failed: " + *newFileName);
408    
409          // ContactElements_Owner
410          if (! ( ids = dataFile.add_var("ContactElements_Owner", ncInt, ncdims[5])) )
411             throw DataException("Error - MeshAdapter::dump: appending ContactElements_Owner to netCDF file failed: " + *newFileName);
412          int_ptr = &mesh->ContactElements->Owner[0];
413          if (! (ids->put(int_ptr, num_ContactElements)) )
414             throw DataException("Error - MeshAdapter::dump: copy ContactElements_Owner to netCDF buffer failed: " + *newFileName);
415    
416          // ContactElements_Color
417          if (! ( ids = dataFile.add_var("ContactElements_Color", ncInt, ncdims[5])) )
418             throw DataException("Error - MeshAdapter::dump: appending ContactElements_Color to netCDF file failed: " + *newFileName);
419          int_ptr = &mesh->ContactElements->Color[0];
420          if (! (ids->put(int_ptr, num_ContactElements)) )
421             throw DataException("Error - MeshAdapter::dump: copy ContactElements_Color to netCDF buffer failed: " + *newFileName);
422    
423          // ContactElements_Nodes
424          if (! ( ids = dataFile.add_var("ContactElements_Nodes", ncInt, ncdims[5], ncdims[9]) ) )
425             throw DataException("Error - MeshAdapter::dump: appending ContactElements_Nodes to netCDF file failed: " + *newFileName);
426          if (! (ids->put(&(mesh->ContactElements->Nodes[0]), num_ContactElements, num_ContactElements_numNodes)) )
427             throw DataException("Error - MeshAdapter::dump: copy ContactElements_Nodes to netCDF buffer failed: " + *newFileName);
428    
429       }
430    
431       // // // // // Points // // // // //
432    
433       if (num_Points>0) {
434    
435          fprintf(stderr, "\n\n\nWARNING: MeshAdapter::dump has not been tested with Point elements\n\n\n");
436    
437          // Points_Id
438          if (! ( ids = dataFile.add_var("Points_Id", ncInt, ncdims[6])) )
439             throw DataException("Error - MeshAdapter::dump: appending Points_Id to netCDF file failed: " + *newFileName);
440          int_ptr = &mesh->Points->Id[0];
441          if (! (ids->put(int_ptr, num_Points)) )
442             throw DataException("Error - MeshAdapter::dump: copy Points_Id to netCDF buffer failed: " + *newFileName);
443    
444          // Points_Tag
445          if (! ( ids = dataFile.add_var("Points_Tag", ncInt, ncdims[6])) )
446             throw DataException("Error - MeshAdapter::dump: appending Points_Tag to netCDF file failed: " + *newFileName);
447          int_ptr = &mesh->Points->Tag[0];
448          if (! (ids->put(int_ptr, num_Points)) )
449             throw DataException("Error - MeshAdapter::dump: copy Points_Tag to netCDF buffer failed: " + *newFileName);
450    
451          // Points_Owner
452          if (! ( ids = dataFile.add_var("Points_Owner", ncInt, ncdims[6])) )
453             throw DataException("Error - MeshAdapter::dump: appending Points_Owner to netCDF file failed: " + *newFileName);
454          int_ptr = &mesh->Points->Owner[0];
455          if (! (ids->put(int_ptr, num_Points)) )
456             throw DataException("Error - MeshAdapter::dump: copy Points_Owner to netCDF buffer failed: " + *newFileName);
457    
458          // Points_Color
459          if (! ( ids = dataFile.add_var("Points_Color", ncInt, ncdims[6])) )
460             throw DataException("Error - MeshAdapter::dump: appending Points_Color to netCDF file failed: " + *newFileName);
461          int_ptr = &mesh->Points->Color[0];
462          if (! (ids->put(int_ptr, num_Points)) )
463             throw DataException("Error - MeshAdapter::dump: copy Points_Color to netCDF buffer failed: " + *newFileName);
464    
465          // Points_Nodes
466          // mesh->Nodes->Id[mesh->Points->Nodes[INDEX2(0,i,1)]]
467          if (! ( ids = dataFile.add_var("Points_Nodes", ncInt, ncdims[6]) ) )
468             throw DataException("Error - MeshAdapter::dump: appending Points_Nodes to netCDF file failed: " + *newFileName);
469          if (! (ids->put(&(mesh->Points->Nodes[0]), num_Points)) )
470             throw DataException("Error - MeshAdapter::dump: copy Points_Nodes to netCDF buffer failed: " + *newFileName);
471    
472       }
473    
474       // // // // // TagMap // // // // //
475    
476       if (num_Tags>0) {
477    
478          // Temp storage to gather node IDs
479          int *Tags_keys = TMPMEMALLOC(num_Tags, int);
480          char name_temp[4096];
481    
482          /* Copy tag data into temp arrays */
483          tag_map = mesh->TagMap;
484          if (tag_map) {
485             int i = 0;
486             while (tag_map) {
487                Tags_keys[i++] = tag_map->tag_key;
488                tag_map=tag_map->next;
489             }
490          }
491    
492          // Tags_keys
493          if (! ( ids = dataFile.add_var("Tags_keys", ncInt, ncdims[10])) )
494             throw DataException("Error - MeshAdapter::dump: appending Tags_keys to netCDF file failed: " + *newFileName);
495          int_ptr = &Tags_keys[0];
496          if (! (ids->put(int_ptr, num_Tags)) )
497             throw DataException("Error - MeshAdapter::dump: copy Tags_keys to netCDF buffer failed: " + *newFileName);
498    
499          // Tags_names_*
500          // This is an array of strings, it should be stored as an array but instead I have hacked in one attribute per string
501          // because the NetCDF manual doesn't tell how to do an array of strings
502          tag_map = mesh->TagMap;
503          if (tag_map) {
504             int i = 0;
505             while (tag_map) {
506                sprintf(name_temp, "Tags_name_%d", i);
507                if (!dataFile.add_att(name_temp, tag_map->name) )
508                   throw DataException("Error - MeshAdapter::dump: appending Tags_names_ to NetCDF file failed: " + *newFileName);
509                tag_map=tag_map->next;
510                i++;
511             }
512          }
513    
514          TMPMEMFREE(Tags_keys);
515    
516       }
517    
518    /* Send token to next MPI process so he can take his turn */
519    #ifdef PASO_MPI
520       if (mpi_rank<mpi_size-1) MPI_Send(&num_Tags, 0, MPI_INT, mpi_rank+1, 81800, mesh->MPIInfo->comm);
521    #endif
522    
523       // NetCDF file is closed by destructor of NcFile object
524    
525    #else
526       Finley_setError(IO_ERROR, "MeshAdapter::dump: not configured with NetCDF. Please contact your installation manager.");
527    #endif  /* USE_NETCDF */
528       checkFinleyError();
529    }
530    
531  string MeshAdapter::getDescription() const  string MeshAdapter::getDescription() const
532  {  {
533    return "FinleyMesh";     return "FinleyMesh";
534  }  }
535    
536  string MeshAdapter::functionSpaceTypeAsString(int functionSpaceType) const  string MeshAdapter::functionSpaceTypeAsString(int functionSpaceType) const
537  {  {
538    FunctionSpaceNamesMapType::iterator loc;     FunctionSpaceNamesMapType::iterator loc;
539    loc=m_functionSpaceTypeNames.find(functionSpaceType);     loc=m_functionSpaceTypeNames.find(functionSpaceType);
540    if (loc==m_functionSpaceTypeNames.end()) {     if (loc==m_functionSpaceTypeNames.end()) {
541      return "Invalid function space type code.";        return "Invalid function space type code.";
542    } else {     } else {
543      return loc->second;        return loc->second;
544    }     }
545  }  }
546    
547  bool MeshAdapter::isValidFunctionSpaceType(int functionSpaceType) const  bool MeshAdapter::isValidFunctionSpaceType(int functionSpaceType) const
548  {  {
549    FunctionSpaceNamesMapType::iterator loc;     FunctionSpaceNamesMapType::iterator loc;
550    loc=m_functionSpaceTypeNames.find(functionSpaceType);     loc=m_functionSpaceTypeNames.find(functionSpaceType);
551    return (loc!=m_functionSpaceTypeNames.end());     return (loc!=m_functionSpaceTypeNames.end());
552  }  }
553    
554  void MeshAdapter::setFunctionSpaceTypeNames()  void MeshAdapter::setFunctionSpaceTypeNames()
555  {  {
556    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
557      (FunctionSpaceNamesMapType::value_type(DegreesOfFreedom,"Finley_DegreesOfFreedom"));     (FunctionSpaceNamesMapType::value_type(DegreesOfFreedom,"Finley_DegreesOfFreedom"));
558    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
559      (FunctionSpaceNamesMapType::value_type(ReducedDegreesOfFreedom,"Finley_ReducedDegreesOfFreedom"));     (FunctionSpaceNamesMapType::value_type(ReducedDegreesOfFreedom,"Finley_ReducedDegreesOfFreedom"));
560    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
561      (FunctionSpaceNamesMapType::value_type(Nodes,"Finley_Nodes"));     (FunctionSpaceNamesMapType::value_type(Nodes,"Finley_Nodes"));
562    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
563      (FunctionSpaceNamesMapType::value_type(Elements,"Finley_Elements"));     (FunctionSpaceNamesMapType::value_type(ReducedNodes,"Finley_Reduced_Nodes"));
564    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
565      (FunctionSpaceNamesMapType::value_type(FaceElements,"Finley_Face_Elements"));     (FunctionSpaceNamesMapType::value_type(Elements,"Finley_Elements"));
566    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
567      (FunctionSpaceNamesMapType::value_type(Points,"Finley_Points"));     (FunctionSpaceNamesMapType::value_type(ReducedElements,"Finley_Reduced_Elements"));
568    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
569      (FunctionSpaceNamesMapType::value_type(ContactElementsZero,"Finley_Contact_Elements_0"));     (FunctionSpaceNamesMapType::value_type(FaceElements,"Finley_Face_Elements"));
570    m_functionSpaceTypeNames.insert     m_functionSpaceTypeNames.insert
571      (FunctionSpaceNamesMapType::value_type(ContactElementsOne,"Finley_Contact_Elements_1"));     (FunctionSpaceNamesMapType::value_type(ReducedFaceElements,"Finley_Reduced_Face_Elements"));
572       m_functionSpaceTypeNames.insert
573       (FunctionSpaceNamesMapType::value_type(Points,"Finley_Points"));
574       m_functionSpaceTypeNames.insert
575       (FunctionSpaceNamesMapType::value_type(ContactElementsZero,"Finley_Contact_Elements_0"));
576       m_functionSpaceTypeNames.insert
577       (FunctionSpaceNamesMapType::value_type(ReducedContactElementsZero,"Finley_Reduced_Contact_Elements_0"));
578       m_functionSpaceTypeNames.insert
579       (FunctionSpaceNamesMapType::value_type(ContactElementsOne,"Finley_Contact_Elements_1"));
580       m_functionSpaceTypeNames.insert
581       (FunctionSpaceNamesMapType::value_type(ReducedContactElementsOne,"Finley_Reduced_Contact_Elements_1"));
582  }  }
583    
584  int MeshAdapter::getContinuousFunctionCode() const  int MeshAdapter::getContinuousFunctionCode() const
585  {  {
586    return Nodes;     return Nodes;
587    }
588    int MeshAdapter::getReducedContinuousFunctionCode() const
589    {
590       return ReducedNodes;
591  }  }
592    
593  int MeshAdapter::getFunctionCode() const  int MeshAdapter::getFunctionCode() const
594  {  {
595    return Elements;     return Elements;
596    }
597    int MeshAdapter::getReducedFunctionCode() const
598    {
599       return ReducedElements;
600  }  }
601    
602  int MeshAdapter::getFunctionOnBoundaryCode() const  int MeshAdapter::getFunctionOnBoundaryCode() const
603  {  {
604    return FaceElements;     return FaceElements;
605    }
606    int MeshAdapter::getReducedFunctionOnBoundaryCode() const
607    {
608       return ReducedFaceElements;
609  }  }
610    
611  int MeshAdapter::getFunctionOnContactZeroCode() const  int MeshAdapter::getFunctionOnContactZeroCode() const
612  {  {
613    return ContactElementsZero;     return ContactElementsZero;
614    }
615    int MeshAdapter::getReducedFunctionOnContactZeroCode() const
616    {
617       return ReducedContactElementsZero;
618  }  }
619    
620  int MeshAdapter::getFunctionOnContactOneCode() const  int MeshAdapter::getFunctionOnContactOneCode() const
621  {  {
622    return ContactElementsOne;     return ContactElementsOne;
623    }
624    int MeshAdapter::getReducedFunctionOnContactOneCode() const
625    {
626       return ReducedContactElementsOne;
627  }  }
628    
629  int MeshAdapter::getSolutionCode() const  int MeshAdapter::getSolutionCode() const
630  {  {
631    return DegreesOfFreedom;     return DegreesOfFreedom;
632  }  }
633    
634  int MeshAdapter::getReducedSolutionCode() const  int MeshAdapter::getReducedSolutionCode() const
635  {  {
636    return ReducedDegreesOfFreedom;     return ReducedDegreesOfFreedom;
637  }  }
638    
639  int MeshAdapter::getDiracDeltaFunctionCode() const  int MeshAdapter::getDiracDeltaFunctionCode() const
640  {  {
641    return Points;     return Points;
 }  
   
 //  
 // returns a pointer to the tag list of samples of functionSpaceType  
 //  
 void MeshAdapter::getTagList(int functionSpaceType, int** tagList,  
                  int* numTags) const  
 {  
   *tagList=NULL;  
   *numTags=0;  
   Finley_Mesh* mesh=m_finleyMesh.get();  
   switch (functionSpaceType) {  
   case(Nodes):  
     if (mesh->Nodes!=NULL) {  
       *tagList=mesh->Nodes->Tag;  
       *numTags=mesh->Nodes->numNodes;  
     }  
     break;  
   case(Elements):  
     if (mesh->Elements!=NULL) {  
       *tagList=mesh->Elements->Tag;  
       *numTags=mesh->Elements->numElements;  
     }  
     break;  
   case(FaceElements):  
     if (mesh->FaceElements!=NULL) {  
       *tagList=mesh->FaceElements->Tag;  
       *numTags=mesh->FaceElements->numElements;  
     }  
     break;  
   case(Points):  
     if (mesh->Points!=NULL) {  
       *tagList=mesh->Points->Tag;  
       *numTags=mesh->Points->numElements;  
     }  
     break;  
   case(ContactElementsZero):  
     if (mesh->ContactElements!=NULL) {  
       *tagList=mesh->ContactElements->Tag;  
       *numTags=mesh->ContactElements->numElements;  
     }  
     break;  
   case(ContactElementsOne):  
     if (mesh->ContactElements!=NULL) {  
       *tagList=mesh->ContactElements->Tag;  
       *numTags=mesh->ContactElements->numElements;  
     }  
     break;  
   case(DegreesOfFreedom):  
     if (mesh->Nodes!=NULL) {  
       *tagList=NULL;  
       *numTags=0;  
     }  
     break;  
   case(ReducedDegreesOfFreedom):  
     if (mesh->Nodes!=NULL) {  
       *tagList=NULL;  
       *numTags=0;  
     }  
     break;  
   default:  
     stringstream temp;  
     temp << "Error - Invalid function space type: "  
      << functionSpaceType << " for domain: " << getDescription();  
     throw FinleyAdapterException(temp.str());  
     break;  
   }  
   if (*tagList==NULL) {  
     stringstream temp;  
     temp << "Error - no tags available for " << functionSpaceType << " for domain: " << getDescription();  
     throw FinleyAdapterException(temp.str());  
   }  
   return;  
642  }  }
643    
644  //  //
645  // returns a pointer to the reference no list of samples of functionSpaceType  // return the spatial dimension of the Mesh:
646  //  //
647  void MeshAdapter::getReferenceNoList(int functionSpaceType, int** referenceNoList,  int MeshAdapter::getDim() const
                  int* numReferenceNo) const  
648  {  {
649    *referenceNoList=NULL;     int numDim=Finley_Mesh_getDim(m_finleyMesh.get());
650    *numReferenceNo=0;     checkFinleyError();
651    Finley_Mesh* mesh=m_finleyMesh.get();     return numDim;
   switch (functionSpaceType) {  
   case(Nodes):  
     if (mesh->Nodes!=NULL) {  
       *referenceNoList=mesh->Nodes->Id;  
       *numReferenceNo=mesh->Nodes->numNodes;  
     }  
     break;  
   case(Elements):  
     if (mesh->Elements!=NULL) {  
       *referenceNoList=mesh->Elements->Id;  
       *numReferenceNo=mesh->Elements->numElements;  
     }  
     break;  
   case(FaceElements):  
     if (mesh->FaceElements!=NULL) {  
       *referenceNoList=mesh->FaceElements->Id;  
       *numReferenceNo=mesh->FaceElements->numElements;  
     }  
     break;  
   case(Points):  
     if (mesh->Points!=NULL) {  
       *referenceNoList=mesh->Points->Id;  
       *numReferenceNo=mesh->Points->numElements;  
     }  
     break;  
   case(ContactElementsZero):  
     if (mesh->ContactElements!=NULL) {  
       *referenceNoList=mesh->ContactElements->Id;  
       *numReferenceNo=mesh->ContactElements->numElements;  
     }  
     break;  
   case(ContactElementsOne):  
     if (mesh->ContactElements!=NULL) {  
       *referenceNoList=mesh->ContactElements->Id;  
       *numReferenceNo=mesh->ContactElements->numElements;  
     }  
     break;  
   case(DegreesOfFreedom):  
     if (mesh->Nodes!=NULL) {  
       *referenceNoList=NULL;  
       *numReferenceNo=0;  
     }  
     break;  
   case(ReducedDegreesOfFreedom):  
     if (mesh->Nodes!=NULL) {  
       *referenceNoList=NULL;  
       *numReferenceNo=0;  
     }  
     break;  
   default:  
     stringstream temp;  
     temp << "Error - Invalid function space type: "  
      << functionSpaceType << " for domain: " << getDescription();  
     throw FinleyAdapterException(temp.str());  
     break;  
   }  
   if (*referenceNoList==NULL) {  
     stringstream temp;  
     temp << "Error - reference number list available for " << functionSpaceType << " for domain: " << getDescription();  
     throw FinleyAdapterException(temp.str());  
   }  
   return;  
652  }  }
653    
654  //  //
655  // return the spatial dimension of the Mesh:  // Return the number of data points summed across all MPI processes
656  //  //
657  int MeshAdapter::getDim() const  int MeshAdapter::getNumDataPointsGlobal() const
658  {  {
659    int numDim=Finley_Mesh_getDim(m_finleyMesh.get());     return Finley_NodeFile_getGlobalNumNodes(m_finleyMesh.get()->Nodes);
   checkFinleyError();  
   return numDim;  
660  }  }
661    
662  //  //
# Line 347  pair<int,int> MeshAdapter::getDataShape( Line 669  pair<int,int> MeshAdapter::getDataShape(
669     int numSamples=0;     int numSamples=0;
670     Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
671     switch (functionSpaceCode) {     switch (functionSpaceCode) {
672        case(Nodes):     case(Nodes):
673             numDataPointsPerSample=1;     numDataPointsPerSample=1;
674             if (mesh->Nodes!=NULL) numSamples=mesh->Nodes->numNodes;     numSamples=Finley_NodeFile_getNumNodes(mesh->Nodes);
675             break;     break;
676        case(Elements):     case(ReducedNodes):
677             if (mesh->Elements!=NULL) {     numDataPointsPerSample=1;
678               numSamples=mesh->Elements->numElements;     numSamples=Finley_NodeFile_getNumReducedNodes(mesh->Nodes);
679               numDataPointsPerSample=mesh->Elements->ReferenceElement->numQuadNodes;     break;
680             }     case(Elements):
681             break;     if (mesh->Elements!=NULL) {
682        case(FaceElements):        numSamples=mesh->Elements->numElements;
683             if (mesh->FaceElements!=NULL) {        numDataPointsPerSample=mesh->Elements->ReferenceElement->numQuadNodes;
684                  numDataPointsPerSample=mesh->FaceElements->ReferenceElement->numQuadNodes;     }
685                  numSamples=mesh->FaceElements->numElements;     break;
686             }     case(ReducedElements):
687             break;     if (mesh->Elements!=NULL) {
688        case(Points):        numSamples=mesh->Elements->numElements;
689             if (mesh->Points!=NULL) {        numDataPointsPerSample=mesh->Elements->ReferenceElementReducedOrder->numQuadNodes;
690               numDataPointsPerSample=1;     }
691               numSamples=mesh->Points->numElements;     break;
692             }     case(FaceElements):
693             break;     if (mesh->FaceElements!=NULL) {
694        case(ContactElementsZero):        numDataPointsPerSample=mesh->FaceElements->ReferenceElement->numQuadNodes;
695             if (mesh->ContactElements!=NULL) {        numSamples=mesh->FaceElements->numElements;
696               numDataPointsPerSample=mesh->ContactElements->ReferenceElement->numQuadNodes;     }
697               numSamples=mesh->ContactElements->numElements;     break;
698             }     case(ReducedFaceElements):
699             break;     if (mesh->FaceElements!=NULL) {
700        case(ContactElementsOne):        numDataPointsPerSample=mesh->FaceElements->ReferenceElementReducedOrder->numQuadNodes;
701             if (mesh->ContactElements!=NULL) {        numSamples=mesh->FaceElements->numElements;
702               numDataPointsPerSample=mesh->ContactElements->ReferenceElement->numQuadNodes;     }
703               numSamples=mesh->ContactElements->numElements;     break;
704             }     case(Points):
705             break;     if (mesh->Points!=NULL) {
706        case(DegreesOfFreedom):        numDataPointsPerSample=1;
707             if (mesh->Nodes!=NULL) {        numSamples=mesh->Points->numElements;
708               numDataPointsPerSample=1;     }
709               numSamples=mesh->Nodes->numDegreesOfFreedom;     break;
710             }     case(ContactElementsZero):
711             break;     if (mesh->ContactElements!=NULL) {
712        case(ReducedDegreesOfFreedom):        numDataPointsPerSample=mesh->ContactElements->ReferenceElement->numQuadNodes;
713             if (mesh->Nodes!=NULL) {        numSamples=mesh->ContactElements->numElements;
714               numDataPointsPerSample=1;     }
715               numSamples=mesh->Nodes->reducedNumDegreesOfFreedom;     break;
716             }     case(ReducedContactElementsZero):
717             break;     if (mesh->ContactElements!=NULL) {
718        default:        numDataPointsPerSample=mesh->ContactElements->ReferenceElementReducedOrder->numQuadNodes;
719          stringstream temp;        numSamples=mesh->ContactElements->numElements;
720          temp << "Error - Invalid function space type: "     }
721           << functionSpaceCode << " for domain: " << getDescription();     break;
722          throw FinleyAdapterException(temp.str());     case(ContactElementsOne):
723          break;     if (mesh->ContactElements!=NULL) {
724        }        numDataPointsPerSample=mesh->ContactElements->ReferenceElement->numQuadNodes;
725        return pair<int,int>(numDataPointsPerSample,numSamples);        numSamples=mesh->ContactElements->numElements;
726       }
727       break;
728       case(ReducedContactElementsOne):
729       if (mesh->ContactElements!=NULL) {
730          numDataPointsPerSample=mesh->ContactElements->ReferenceElementReducedOrder->numQuadNodes;
731          numSamples=mesh->ContactElements->numElements;
732       }
733       break;
734       case(DegreesOfFreedom):
735       if (mesh->Nodes!=NULL) {
736          numDataPointsPerSample=1;
737          numSamples=Finley_NodeFile_getNumDegreesOfFreedom(mesh->Nodes);
738       }
739       break;
740       case(ReducedDegreesOfFreedom):
741       if (mesh->Nodes!=NULL) {
742          numDataPointsPerSample=1;
743          numSamples=Finley_NodeFile_getNumReducedDegreesOfFreedom(mesh->Nodes);
744       }
745       break;
746       default:
747          stringstream temp;
748          temp << "Error - Invalid function space type: " << functionSpaceCode << " for domain: " << getDescription();
749          throw FinleyAdapterException(temp.str());
750          break;
751       }
752       return pair<int,int>(numDataPointsPerSample,numSamples);
753  }  }
754    
755  //  //
756  // adds linear PDE of second order into a given stiffness matrix and right hand side:  // adds linear PDE of second order into a given stiffness matrix and right hand side:
757  //  //
758  void MeshAdapter::addPDEToSystem(  void MeshAdapter::addPDEToSystem(
759                       SystemMatrixAdapter& mat, Data& rhs,                                   SystemMatrixAdapter& mat, escript::Data& rhs,
760                       const Data& A, const Data& B, const Data& C,const  Data& D,const  Data& X,const  Data& Y,                                   const escript::Data& A, const escript::Data& B, const escript::Data& C,const  escript::Data& D,const  escript::Data& X,const  escript::Data& Y,
761                       const Data& d, const Data& y,                                   const escript::Data& d, const escript::Data& y,
762                       const Data& d_contact,const Data& y_contact) const                                   const escript::Data& d_contact,const escript::Data& y_contact) const
763  {  {
764       escriptDataC _rhs=rhs.getDataC();
765       escriptDataC _A  =A.getDataC();
766       escriptDataC _B=B.getDataC();
767       escriptDataC _C=C.getDataC();
768       escriptDataC _D=D.getDataC();
769       escriptDataC _X=X.getDataC();
770       escriptDataC _Y=Y.getDataC();
771       escriptDataC _d=d.getDataC();
772       escriptDataC _y=y.getDataC();
773       escriptDataC _d_contact=d_contact.getDataC();
774       escriptDataC _y_contact=y_contact.getDataC();
775    
776     Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
777     Finley_Assemble_PDE(mesh->Nodes,mesh->Elements,mat.getFinley_SystemMatrix(),&(rhs.getDataC()),  
778                         &(A.getDataC()),&(B.getDataC()),&(C.getDataC()),&(D.getDataC()),&(X.getDataC()),&(Y.getDataC()));     Finley_Assemble_PDE(mesh->Nodes,mesh->Elements,mat.getPaso_SystemMatrix(), &_rhs, &_A, &_B, &_C, &_D, &_X, &_Y );
779       checkFinleyError();
780    
781       Finley_Assemble_PDE(mesh->Nodes,mesh->FaceElements, mat.getPaso_SystemMatrix(), &_rhs, 0, 0, 0, &_d, 0, &_y );
782     checkFinleyError();     checkFinleyError();
783     Finley_Assemble_RobinCondition(mesh->Nodes,mesh->FaceElements,  
784                    mat.getFinley_SystemMatrix(),     Finley_Assemble_PDE(mesh->Nodes,mesh->ContactElements, mat.getPaso_SystemMatrix(), &_rhs , 0, 0, 0, &_d_contact, 0, &_y_contact );
                   &(rhs.getDataC()),  
                                   &(d.getDataC()),&(y.getDataC()),  
                                   Finley_Assemble_handelShapeMissMatch_Mean_out);  
    checkFinleyError();  
    Finley_Assemble_RobinCondition(mesh->Nodes,mesh->ContactElements,  
                   mat.getFinley_SystemMatrix(),  
                   &(rhs.getDataC()),  
                                   &(d_contact.getDataC()),  
                   &(y_contact.getDataC()),  
                                   Finley_Assemble_handelShapeMissMatch_Step_out);  
785     checkFinleyError();     checkFinleyError();
786  }  }
787    
788    void  MeshAdapter::addPDEToLumpedSystem(
789                                            escript::Data& mat,
790                                            const escript::Data& D,
791                                            const escript::Data& d) const
792    {
793       escriptDataC _mat=mat.getDataC();
794       escriptDataC _D=D.getDataC();
795       escriptDataC _d=d.getDataC();
796    
797       Finley_Mesh* mesh=m_finleyMesh.get();
798    
799       Finley_Assemble_LumpedSystem(mesh->Nodes,mesh->Elements,&_mat, &_D);
800       Finley_Assemble_LumpedSystem(mesh->Nodes,mesh->FaceElements,&_mat, &_d);
801    
802       checkFinleyError();
803    }
804    
805    
806  //  //
807  // adds linear PDE of second order into the right hand side only  // adds linear PDE of second order into the right hand side only
808  //  //
809  void MeshAdapter::addPDEToRHS( Data& rhs,  void MeshAdapter::addPDEToRHS( escript::Data& rhs, const  escript::Data& X,const  escript::Data& Y, const escript::Data& y, const escript::Data& y_contact) const
                      const  Data& X,const  Data& Y, const Data& y, const Data& y_contact) const  
810  {  {
811     Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
812    
813     // Finley_Assemble_PDE_RHS(mesh->Nodes,mesh->Elements,&(rhs.getDataC()),&(X.getDataC()),&(Y.getDataC()));     escriptDataC _rhs=rhs.getDataC();
814     Finley_Assemble_PDE(mesh->Nodes,mesh->Elements,0,&(rhs.getDataC()),0,0,0,0,&(X.getDataC()),&(Y.getDataC()));     escriptDataC _X=X.getDataC();
815       escriptDataC _Y=Y.getDataC();
816       escriptDataC _y=y.getDataC();
817       escriptDataC _y_contact=y_contact.getDataC();
818    
819       Finley_Assemble_PDE(mesh->Nodes,mesh->Elements, 0, &_rhs, 0, 0, 0, 0, &_X, &_Y );
820       checkFinleyError();
821    
822       Finley_Assemble_PDE(mesh->Nodes,mesh->FaceElements, 0, &_rhs, 0, 0, 0, 0, 0, &_y );
823       checkFinleyError();
824    
825       Finley_Assemble_PDE(mesh->Nodes,mesh->ContactElements, 0, &_rhs , 0, 0, 0, 0, 0, &_y_contact );
826       checkFinleyError();
827    }
828    //
829    // adds PDE of second order into a transport problem
830    //
831    void MeshAdapter::addPDEToTransportProblem(
832                                               TransportProblemAdapter& tp, escript::Data& source, const escript::Data& M,
833                                               const escript::Data& A, const escript::Data& B, const escript::Data& C,
834                                               const  escript::Data& D,const  escript::Data& X,const  escript::Data& Y,
835                                               const escript::Data& d, const escript::Data& y,
836                                               const escript::Data& d_contact,const escript::Data& y_contact) const
837    {
838       DataTypes::ShapeType shape;
839       source.expand();
840       escriptDataC _source=source.getDataC();
841       escriptDataC _M=M.getDataC();
842       escriptDataC _A=A.getDataC();
843       escriptDataC _B=B.getDataC();
844       escriptDataC _C=C.getDataC();
845       escriptDataC _D=D.getDataC();
846       escriptDataC _X=X.getDataC();
847       escriptDataC _Y=Y.getDataC();
848       escriptDataC _d=d.getDataC();
849       escriptDataC _y=y.getDataC();
850       escriptDataC _d_contact=d_contact.getDataC();
851       escriptDataC _y_contact=y_contact.getDataC();
852    
853       Finley_Mesh* mesh=m_finleyMesh.get();
854       Paso_FCTransportProblem* _tp = tp.getPaso_FCTransportProblem();
855    
856       Finley_Assemble_PDE(mesh->Nodes,mesh->Elements,_tp->mass_matrix, &_source, 0, 0, 0, &_M, 0, 0 );
857     checkFinleyError();     checkFinleyError();
858    
859     // Finley_Assemble_RobinCondition_RHS(mesh->Nodes,mesh->FaceElements,&(rhs.getDataC()),&(y.getDataC()),Finley_Assemble_handelShapeMissMatch_Mean_out);     Finley_Assemble_PDE(mesh->Nodes,mesh->Elements,_tp->transport_matrix, &_source, &_A, &_B, &_C, &_D, &_X, &_Y );
860     Finley_Assemble_RobinCondition(mesh->Nodes,mesh->FaceElements,0,&(rhs.getDataC()),0,&(y.getDataC()),Finley_Assemble_handelShapeMissMatch_Mean_out);     checkFinleyError();
861    
862       Finley_Assemble_PDE(mesh->Nodes,mesh->FaceElements, _tp->transport_matrix, &_source, 0, 0, 0, &_d, 0, &_y );
863     checkFinleyError();     checkFinleyError();
864     Finley_Assemble_RobinCondition(mesh->Nodes,mesh->ContactElements,0,&(rhs.getDataC()),0,&(y_contact.getDataC()),Finley_Assemble_handelShapeMissMatch_Step_out);  
865     // Finley_Assemble_RobinCondition_RHS(mesh->Nodes,mesh->ContactElements,&(rhs.getDataC()),&(y_contact.getDataC()),Finley_Assemble_handelShapeMissMatch_Step_out);     Finley_Assemble_PDE(mesh->Nodes,mesh->ContactElements, _tp->transport_matrix, &_source , 0, 0, 0, &_d_contact, 0, &_y_contact );
866     checkFinleyError();     checkFinleyError();
867  }  }
868    
869  //  //
870  // interpolates data between different function spaces:  // interpolates data between different function spaces:
871  //  //
872  void MeshAdapter::interpolateOnDomain(Data& target,const Data& in) const  void MeshAdapter::interpolateOnDomain(escript::Data& target,const escript::Data& in) const
873  {  {
874    const MeshAdapter& inDomain=dynamic_cast<const MeshAdapter&>(in.getFunctionSpace().getDomain());     const MeshAdapter& inDomain=dynamic_cast<const MeshAdapter&>(*(in.getFunctionSpace().getDomain()));
875    const MeshAdapter& targetDomain=dynamic_cast<const MeshAdapter&>(target.getFunctionSpace().getDomain());     const MeshAdapter& targetDomain=dynamic_cast<const MeshAdapter&>(*(target.getFunctionSpace().getDomain()));
876    if (inDomain!=*this)     if (inDomain!=*this)  
877       throw FinleyAdapterException("Error - Illegal domain of interpolant.");        throw FinleyAdapterException("Error - Illegal domain of interpolant.");
878    if (targetDomain!=*this)     if (targetDomain!=*this)
879       throw FinleyAdapterException("Error - Illegal domain of interpolation target.");        throw FinleyAdapterException("Error - Illegal domain of interpolation target.");
880    
881    Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
882    switch(in.getFunctionSpace().getTypeCode()) {     escriptDataC _target=target.getDataC();
883       case(Nodes):     escriptDataC _in=in.getDataC();
884          switch(target.getFunctionSpace().getTypeCode()) {     switch(in.getFunctionSpace().getTypeCode()) {
885             case(Nodes):     case(Nodes):
886             case(ReducedDegreesOfFreedom):     switch(target.getFunctionSpace().getTypeCode()) {
887             case(DegreesOfFreedom):     case(Nodes):
888                 Finley_Assemble_CopyNodalData(mesh->Nodes,&(target.getDataC()),&(in.getDataC()));     case(ReducedNodes):
889                 break;     case(DegreesOfFreedom):
890             case(Elements):     case(ReducedDegreesOfFreedom):
891                 Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&(in.getDataC()),&(target.getDataC()));     Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
892                 break;     break;
893             case(FaceElements):     case(Elements):
894                 Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&(in.getDataC()),&(target.getDataC()));     case(ReducedElements):
895                 break;     Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in,&_target);
896             case(Points):     break;
897                 Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&(in.getDataC()),&(target.getDataC()));     case(FaceElements):
898                 break;     case(ReducedFaceElements):
899             case(ContactElementsZero):     Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in,&_target);
900                 Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&(in.getDataC()),&(target.getDataC()));     break;
901                 break;     case(Points):
902             case(ContactElementsOne):     Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&_in,&_target);
903                 Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&(in.getDataC()),&(target.getDataC()));     break;
904                 break;     case(ContactElementsZero):
905             default:     case(ReducedContactElementsZero):
906                 Finley_ErrorCode=TYPE_ERROR;     Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
907                 sprintf(Finley_ErrorMsg,"Interpolation on Domain: Finley does not know anything about function space type %d",target.getFunctionSpace().getTypeCode());     break;
908                 break;     case(ContactElementsOne):
909          }     case(ReducedContactElementsOne):
910          break;     Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
911       case(Elements):     break;
912          if (target.getFunctionSpace().getTypeCode()==Elements) {     default:
913             Finley_Assemble_CopyElementData(mesh->Elements,&(target.getDataC()),&(in.getDataC()));        stringstream temp;
914          } else {        temp << "Error - Interpolation on Domain: Finley does not know anything about function space type " << target.getFunctionSpace().getTypeCode();
915             Finley_ErrorCode=TYPE_ERROR;        throw FinleyAdapterException(temp.str());
916             sprintf(Finley_ErrorMsg,"No interpolation with data on elements possible.");        break;
917          }     }
918          break;     break;
919       case(FaceElements):     case(ReducedNodes):
920          if (target.getFunctionSpace().getTypeCode()==FaceElements) {     switch(target.getFunctionSpace().getTypeCode()) {
921             Finley_Assemble_CopyElementData(mesh->FaceElements,&(target.getDataC()),&(in.getDataC()));     case(Nodes):
922          } else {     case(ReducedNodes):
923             Finley_ErrorCode=TYPE_ERROR;     case(DegreesOfFreedom):
924             sprintf(Finley_ErrorMsg,"No interpolation with data on face elements possible.");     case(ReducedDegreesOfFreedom):
925             break;     Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
926         }     break;
927       case(Points):     case(Elements):
928          if (target.getFunctionSpace().getTypeCode()==Points) {     case(ReducedElements):
929             Finley_Assemble_CopyElementData(mesh->Points,&(target.getDataC()),&(in.getDataC()));     Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in,&_target);
930          } else {     break;
931             Finley_ErrorCode=TYPE_ERROR;     case(FaceElements):
932             sprintf(Finley_ErrorMsg,"No interpolation with data on points possible.");     case(ReducedFaceElements):
933             break;     Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in,&_target);
934          }     break;
935          break;     case(Points):
936       case(ContactElementsZero):     Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&_in,&_target);
937       case(ContactElementsOne):     break;
938          if (target.getFunctionSpace().getTypeCode()==ContactElementsZero || target.getFunctionSpace().getTypeCode()==ContactElementsOne) {     case(ContactElementsZero):
939             Finley_Assemble_CopyElementData(mesh->ContactElements,&(target.getDataC()),&(in.getDataC()));     case(ReducedContactElementsZero):
940          } else {     Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
941             Finley_ErrorCode=TYPE_ERROR;     break;
942             sprintf(Finley_ErrorMsg,"No interpolation with data on contact elements possible.");     case(ContactElementsOne):
943             break;     case(ReducedContactElementsOne):
944          }     Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
945          break;     break;
946       case(DegreesOfFreedom):     default:
947          switch(target.getFunctionSpace().getTypeCode()) {        stringstream temp;
948             case(ReducedDegreesOfFreedom):        temp << "Error - Interpolation on Domain: Finley does not know anything about function space type " << target.getFunctionSpace().getTypeCode();
949             case(DegreesOfFreedom):        throw FinleyAdapterException(temp.str());
950             case(Nodes):        break;
951                Finley_Assemble_CopyNodalData(mesh->Nodes,&(target.getDataC()),&(in.getDataC()));     }
952                break;     break;
953             case(Elements):     case(Elements):
954                Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&(in.getDataC()),&(target.getDataC()));     if (target.getFunctionSpace().getTypeCode()==Elements) {
955                break;        Finley_Assemble_CopyElementData(mesh->Elements,&_target,&_in);
956             case(FaceElements):     } else if (target.getFunctionSpace().getTypeCode()==ReducedElements) {
957                Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&(in.getDataC()),&(target.getDataC()));        Finley_Assemble_AverageElementData(mesh->Elements,&_target,&_in);
958                break;     } else {
959             case(Points):        throw FinleyAdapterException("Error - No interpolation with data on elements possible.");
960                Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&(in.getDataC()),&(target.getDataC()));     }
961                break;     break;
962             case(ContactElementsZero):     case(ReducedElements):
963             case(ContactElementsOne):     if (target.getFunctionSpace().getTypeCode()==ReducedElements) {
964                Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&(in.getDataC()),&(target.getDataC()));        Finley_Assemble_CopyElementData(mesh->Elements,&_target,&_in);
965               break;     } else {
966             default:        throw FinleyAdapterException("Error - No interpolation with data on elements with reduced integration order possible.");
967               Finley_ErrorCode=TYPE_ERROR;     }
968               sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",target.getFunctionSpace().getTypeCode());     break;
969               break;     case(FaceElements):
970          }     if (target.getFunctionSpace().getTypeCode()==FaceElements) {
971          break;        Finley_Assemble_CopyElementData(mesh->FaceElements,&_target,&_in);
972       case(ReducedDegreesOfFreedom):     } else if (target.getFunctionSpace().getTypeCode()==ReducedFaceElements) {
973         switch(target.getFunctionSpace().getTypeCode()) {        Finley_Assemble_AverageElementData(mesh->FaceElements,&_target,&_in);
974            case(ReducedDegreesOfFreedom):     } else {
975               Finley_Assemble_CopyNodalData(mesh->Nodes,&(target.getDataC()),&(in.getDataC()));        throw FinleyAdapterException("Error - No interpolation with data on face elements possible.");
976               break;     }
977            case(Elements):     break;
978               Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&(in.getDataC()),&(target.getDataC()));     case(ReducedFaceElements):
979               break;     if (target.getFunctionSpace().getTypeCode()==ReducedFaceElements) {
980            case(FaceElements):        Finley_Assemble_CopyElementData(mesh->FaceElements,&_target,&_in);
981               Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&(in.getDataC()),&(target.getDataC()));     } else {
982               break;        throw FinleyAdapterException("Error - No interpolation with data on face elements with reduced integration order possible.");
983            case(Points):     }
984               Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&(in.getDataC()),&(target.getDataC()));     break;
985               break;     case(Points):
986            case(ContactElementsZero):     if (target.getFunctionSpace().getTypeCode()==Points) {
987            case(ContactElementsOne):        Finley_Assemble_CopyElementData(mesh->Points,&_target,&_in);
988               Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&(in.getDataC()),&(target.getDataC()));     } else {
989               break;        throw FinleyAdapterException("Error - No interpolation with data on points possible.");
990            case(Nodes):     }
991               Finley_ErrorCode=TYPE_ERROR;     break;
992               sprintf(Finley_ErrorMsg,"Finley does not support interpolation from reduced degrees of freedom to mesh nodes.");     case(ContactElementsZero):
993               break;     case(ContactElementsOne):
994            case(DegreesOfFreedom):     if (target.getFunctionSpace().getTypeCode()==ContactElementsZero || target.getFunctionSpace().getTypeCode()==ContactElementsOne) {
995               Finley_ErrorCode=TYPE_ERROR;        Finley_Assemble_CopyElementData(mesh->ContactElements,&_target,&_in);
996               sprintf(Finley_ErrorMsg,"Finley does not support interpolation from reduced degrees of freedom to degrees of freedom");     } else if (target.getFunctionSpace().getTypeCode()==ReducedContactElementsZero || target.getFunctionSpace().getTypeCode()==ReducedContactElementsOne) {
997               break;        Finley_Assemble_AverageElementData(mesh->ContactElements,&_target,&_in);
998            default:     } else {
999               Finley_ErrorCode=TYPE_ERROR;        throw FinleyAdapterException("Error - No interpolation with data on contact elements possible.");
1000               sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",target.getFunctionSpace().getTypeCode());     }
1001               break;     break;
1002         }     case(ReducedContactElementsZero):
1003         break;     case(ReducedContactElementsOne):
1004       default:     if (target.getFunctionSpace().getTypeCode()==ReducedContactElementsZero || target.getFunctionSpace().getTypeCode()==ReducedContactElementsOne) {
1005          Finley_ErrorCode=TYPE_ERROR;        Finley_Assemble_CopyElementData(mesh->ContactElements,&_target,&_in);
1006          sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",in.getFunctionSpace().getTypeCode());     } else {
1007          break;        throw FinleyAdapterException("Error - No interpolation with data on contact elements with reduced integration order possible.");
1008    }     }
1009    checkFinleyError();     break;
1010       case(DegreesOfFreedom):      
1011       switch(target.getFunctionSpace().getTypeCode()) {
1012       case(ReducedDegreesOfFreedom):
1013       case(DegreesOfFreedom):
1014       Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
1015       break;
1016    
1017       case(Nodes):
1018       case(ReducedNodes):
1019       if (getMPISize()>1) {
1020          escript::Data temp=escript::Data(in);
1021          temp.expand();
1022          escriptDataC _in2 = temp.getDataC();
1023          Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in2);
1024       } else {
1025          Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
1026       }
1027       break;
1028       case(Elements):
1029       case(ReducedElements):
1030       if (getMPISize()>1) {
1031          escript::Data temp=escript::Data( in,  continuousFunction(asAbstractContinuousDomain()) );
1032          escriptDataC _in2 = temp.getDataC();
1033          Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in2,&_target);
1034       } else {
1035          Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in,&_target);
1036       }
1037       break;
1038       case(FaceElements):
1039       case(ReducedFaceElements):
1040       if (getMPISize()>1) {
1041          escript::Data temp=escript::Data( in,  continuousFunction(asAbstractContinuousDomain()) );
1042          escriptDataC _in2 = temp.getDataC();
1043          Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in2,&_target);
1044    
1045       } else {
1046          Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in,&_target);
1047       }
1048       break;
1049       case(Points):
1050       if (getMPISize()>1) {
1051          escript::Data temp=escript::Data( in,  continuousFunction(asAbstractContinuousDomain()) );
1052          escriptDataC _in2 = temp.getDataC();
1053       } else {
1054          Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&_in,&_target);
1055       }
1056       break;
1057       case(ContactElementsZero):
1058       case(ContactElementsOne):
1059       case(ReducedContactElementsZero):
1060       case(ReducedContactElementsOne):
1061       if (getMPISize()>1) {
1062          escript::Data temp=escript::Data( in,  continuousFunction(asAbstractContinuousDomain()) );
1063          escriptDataC _in2 = temp.getDataC();
1064          Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in2,&_target);
1065       } else {
1066          Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
1067       }
1068       break;
1069       default:
1070          stringstream temp;
1071          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << target.getFunctionSpace().getTypeCode();
1072          throw FinleyAdapterException(temp.str());
1073          break;
1074       }
1075       break;
1076       case(ReducedDegreesOfFreedom):
1077       switch(target.getFunctionSpace().getTypeCode()) {
1078       case(Nodes):
1079       throw FinleyAdapterException("Error - Finley does not support interpolation from reduced degrees of freedom to mesh nodes.");
1080       break;
1081       case(ReducedNodes):
1082       if (getMPISize()>1) {
1083          escript::Data temp=escript::Data(in);
1084          temp.expand();
1085          escriptDataC _in2 = temp.getDataC();
1086          Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in2);
1087       } else {
1088          Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
1089       }
1090       break;
1091       case(DegreesOfFreedom):
1092       throw FinleyAdapterException("Error - Finley does not support interpolation from reduced degrees of freedom to degrees of freedom");
1093       break;
1094       case(ReducedDegreesOfFreedom):
1095       Finley_Assemble_CopyNodalData(mesh->Nodes,&_target,&_in);
1096       break;
1097       case(Elements):
1098       case(ReducedElements):
1099       if (getMPISize()>1) {
1100          escript::Data temp=escript::Data( in,  reducedContinuousFunction(asAbstractContinuousDomain()) );
1101          escriptDataC _in2 = temp.getDataC();
1102          Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in2,&_target);
1103       } else {
1104          Finley_Assemble_interpolate(mesh->Nodes,mesh->Elements,&_in,&_target);
1105       }
1106       break;
1107       case(FaceElements):
1108       case(ReducedFaceElements):
1109       if (getMPISize()>1) {
1110          escript::Data temp=escript::Data( in,  reducedContinuousFunction(asAbstractContinuousDomain()) );
1111          escriptDataC _in2 = temp.getDataC();
1112          Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in2,&_target);
1113       } else {
1114          Finley_Assemble_interpolate(mesh->Nodes,mesh->FaceElements,&_in,&_target);
1115       }
1116       break;
1117       case(Points):
1118       if (getMPISize()>1) {
1119          escript::Data temp=escript::Data( in,  reducedContinuousFunction(asAbstractContinuousDomain()) );
1120          escriptDataC _in2 = temp.getDataC();
1121          Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&_in2,&_target);
1122       } else {
1123          Finley_Assemble_interpolate(mesh->Nodes,mesh->Points,&_in,&_target);
1124       }
1125       break;
1126       case(ContactElementsZero):
1127       case(ContactElementsOne):
1128       case(ReducedContactElementsZero):
1129       case(ReducedContactElementsOne):
1130       if (getMPISize()>1) {
1131          escript::Data temp=escript::Data( in,  reducedContinuousFunction(asAbstractContinuousDomain()) );
1132          escriptDataC _in2 = temp.getDataC();
1133          Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in2,&_target);
1134       } else {
1135          Finley_Assemble_interpolate(mesh->Nodes,mesh->ContactElements,&_in,&_target);
1136       }
1137       break;
1138       default:
1139          stringstream temp;
1140          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << target.getFunctionSpace().getTypeCode();
1141          throw FinleyAdapterException(temp.str());
1142          break;
1143       }
1144       break;
1145       default:
1146          stringstream temp;
1147          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type %d" << in.getFunctionSpace().getTypeCode();
1148          throw FinleyAdapterException(temp.str());
1149          break;
1150       }
1151       checkFinleyError();
1152  }  }
1153    
1154  //  //
1155  // copies the locations of sample points into x:  // copies the locations of sample points into x:
1156  //  //
1157  void MeshAdapter::setToX(Data& arg) const  void MeshAdapter::setToX(escript::Data& arg) const
1158  {  {
1159    const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(arg.getFunctionSpace().getDomain());     const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(*(arg.getFunctionSpace().getDomain()));
1160    if (argDomain!=*this)     if (argDomain!=*this)
1161       throw FinleyAdapterException("Error - Illegal domain of data point locations");        throw FinleyAdapterException("Error - Illegal domain of data point locations");
1162    Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
1163    // in case of values node coordinates we can do the job directly:     // in case of values node coordinates we can do the job directly:
1164    if (arg.getFunctionSpace().getTypeCode()==Nodes) {     if (arg.getFunctionSpace().getTypeCode()==Nodes) {
1165       Finley_Assemble_NodeCoordinates(mesh->Nodes,&(arg.getDataC()));        escriptDataC _arg=arg.getDataC();
1166    } else {        Finley_Assemble_NodeCoordinates(mesh->Nodes,&_arg);
1167       Data tmp_data=Vector(0.0,continuousFunction(asAbstractContinuousDomain()),true);     } else {
1168       Finley_Assemble_NodeCoordinates(mesh->Nodes,&(tmp_data.getDataC()));        escript::Data tmp_data=Vector(0.0,continuousFunction(asAbstractContinuousDomain()),true);
1169       // this is then interpolated onto arg:        escriptDataC _tmp_data=tmp_data.getDataC();
1170       interpolateOnDomain(arg,tmp_data);        Finley_Assemble_NodeCoordinates(mesh->Nodes,&_tmp_data);
1171    }        // this is then interpolated onto arg:
1172    checkFinleyError();        interpolateOnDomain(arg,tmp_data);
1173       }
1174       checkFinleyError();
1175  }  }
1176    
1177  //  //
1178  // return the normal vectors at the location of data points as a Data object:  // return the normal vectors at the location of data points as a Data object:
1179  //  //
1180  void MeshAdapter::setToNormal(Data& normal) const  void MeshAdapter::setToNormal(escript::Data& normal) const
1181  {  {
1182    const MeshAdapter& normalDomain=dynamic_cast<const MeshAdapter&>(normal.getFunctionSpace().getDomain());  /*   const MeshAdapter& normalDomain=dynamic_cast<const MeshAdapter&>(normal.getFunctionSpace().getDomain());*/
1183    if (normalDomain!=*this)     const MeshAdapter& normalDomain=dynamic_cast<const MeshAdapter&>(*(normal.getFunctionSpace().getDomain()));
1184       throw FinleyAdapterException("Error - Illegal domain of normal locations");     if (normalDomain!=*this)
1185    Finley_Mesh* mesh=m_finleyMesh.get();        throw FinleyAdapterException("Error - Illegal domain of normal locations");
1186    switch(normal.getFunctionSpace().getTypeCode()) {     Finley_Mesh* mesh=m_finleyMesh.get();
1187      case(Nodes):     escriptDataC _normal=normal.getDataC();
1188        Finley_ErrorCode=TYPE_ERROR;     switch(normal.getFunctionSpace().getTypeCode()) {
1189        sprintf(Finley_ErrorMsg,"Finley does not support surface normal vectors for nodes");     case(Nodes):
1190        break;     throw FinleyAdapterException("Error - Finley does not support surface normal vectors for nodes");
1191      case(Elements):     break;
1192        Finley_ErrorCode=TYPE_ERROR;     case(ReducedNodes):
1193        sprintf(Finley_ErrorMsg,"Finley does not support surface normal vectors for elements");     throw FinleyAdapterException("Error - Finley does not support surface normal vectors for reduced nodes");
1194        break;     break;
1195      case (FaceElements):     case(Elements):
1196        Finley_Assemble_setNormal(mesh->Nodes,mesh->FaceElements,&(normal.getDataC()));     throw FinleyAdapterException("Error - Finley does not support surface normal vectors for elements");
1197        break;     break;
1198      case(Points):     case(ReducedElements):
1199        Finley_ErrorCode=TYPE_ERROR;     throw FinleyAdapterException("Error - Finley does not support surface normal vectors for elements with reduced integration order");
1200        sprintf(Finley_ErrorMsg,"Finley does not support surface normal vectors for point elements");     break;
1201        break;     case (FaceElements):
1202      case (ContactElementsOne):     Finley_Assemble_setNormal(mesh->Nodes,mesh->FaceElements,&_normal);
1203      case (ContactElementsZero):     break;
1204        Finley_Assemble_setNormal(mesh->Nodes,mesh->ContactElements,&(normal.getDataC()));     case (ReducedFaceElements):
1205        break;     Finley_Assemble_setNormal(mesh->Nodes,mesh->FaceElements,&_normal);
1206      case(DegreesOfFreedom):     break;
1207        Finley_ErrorCode=TYPE_ERROR;     case(Points):
1208        sprintf(Finley_ErrorMsg,"Finley does not support surface normal vectors for degrees of freedom.");     throw FinleyAdapterException("Error - Finley does not support surface normal vectors for point elements");
1209        break;     break;
1210      case(ReducedDegreesOfFreedom):     case (ContactElementsOne):
1211        Finley_ErrorCode=TYPE_ERROR;     case (ContactElementsZero):
1212        sprintf(Finley_ErrorMsg,"Finley does not support surface normal vectors for reduced degrees of freedom.");     Finley_Assemble_setNormal(mesh->Nodes,mesh->ContactElements,&_normal);
1213        break;     break;
1214      default:     case (ReducedContactElementsOne):
1215        Finley_ErrorCode=TYPE_ERROR;     case (ReducedContactElementsZero):
1216        sprintf(Finley_ErrorMsg,"Normal Vectors: Finley does not know anything about function space type %d",normal.getFunctionSpace().getTypeCode());     Finley_Assemble_setNormal(mesh->Nodes,mesh->ContactElements,&_normal);
1217       break;
1218       case(DegreesOfFreedom):
1219       throw FinleyAdapterException("Error - Finley does not support surface normal vectors for degrees of freedom.");
1220       break;
1221       case(ReducedDegreesOfFreedom):
1222       throw FinleyAdapterException("Error - Finley does not support surface normal vectors for reduced degrees of freedom.");
1223       break;
1224       default:
1225          stringstream temp;
1226          temp << "Error - Normal Vectors: Finley does not know anything about function space type " << normal.getFunctionSpace().getTypeCode();
1227          throw FinleyAdapterException(temp.str());
1228        break;        break;
1229    }     }
1230    checkFinleyError();     checkFinleyError();
1231  }  }
1232    
1233  //  //
1234  // interpolates data to other domain:  // interpolates data to other domain:
1235  //  //
1236  void MeshAdapter::interpolateACross(Data& target,const Data& source) const  void MeshAdapter::interpolateACross(escript::Data& target,const escript::Data& source) const
1237  {  {
1238    const MeshAdapter& targetDomain=dynamic_cast<const MeshAdapter&>(target.getFunctionSpace().getDomain());     const_Domain_ptr targetDomain_p=target.getFunctionSpace().getDomain();
1239    if (targetDomain!=*this)     const MeshAdapter* targetDomain=dynamic_cast<const MeshAdapter*>(targetDomain_p.get());
1240       throw FinleyAdapterException("Error - Illegal domain of interpolation target");     if (targetDomain!=this)
1241          throw FinleyAdapterException("Error - Illegal domain of interpolation target");
1242    Finley_ErrorCode=SYSTEM_ERROR;  
1243    sprintf(Finley_ErrorMsg,"Finley does not allow interpolation across domains yet.");     throw FinleyAdapterException("Error - Finley does not allow interpolation across domains yet.");
   checkFinleyError();  
1244  }  }
1245    
1246  //  //
1247  // calculates the integral of a function defined of arg:  // calculates the integral of a function defined of arg:
1248  //  //
1249  void MeshAdapter::setToIntegrals(std::vector<double>& integrals,const Data& arg) const  void MeshAdapter::setToIntegrals(std::vector<double>& integrals,const escript::Data& arg) const
1250  {  {
1251    const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(arg.getFunctionSpace().getDomain());     const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(*(arg.getFunctionSpace().getDomain()));
1252    if (argDomain!=*this)     if (argDomain!=*this)
1253       throw FinleyAdapterException("Error - Illegal domain of integration kernel");        throw FinleyAdapterException("Error - Illegal domain of integration kernel");
1254    
1255    Finley_Mesh* mesh=m_finleyMesh.get();     double blocktimer_start = blocktimer_time();
1256    switch(arg.getFunctionSpace().getTypeCode()) {     Finley_Mesh* mesh=m_finleyMesh.get();
1257       case(Nodes):     escriptDataC _temp;
1258          Finley_ErrorCode=TYPE_ERROR;     escript::Data temp;
1259          sprintf(Finley_ErrorMsg,"Integral of data on nodes is not supported.");     escriptDataC _arg=arg.getDataC();
1260          break;     switch(arg.getFunctionSpace().getTypeCode()) {
1261       case(Elements):     case(Nodes):
1262          Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&(arg.getDataC()),&integrals[0]);     temp=escript::Data( arg, escript::function(asAbstractContinuousDomain()) );
1263          break;     _temp=temp.getDataC();
1264       case(FaceElements):     Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_temp,&integrals[0]);
1265          Finley_Assemble_integrate(mesh->Nodes,mesh->FaceElements,&(arg.getDataC()),&integrals[0]);     break;
1266          break;     case(ReducedNodes):
1267       case(Points):     temp=escript::Data( arg, escript::function(asAbstractContinuousDomain()) );
1268          Finley_ErrorCode=TYPE_ERROR;     _temp=temp.getDataC();
1269          sprintf(Finley_ErrorMsg,"Integral of data on points is not supported.");     Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_temp,&integrals[0]);
1270          break;     break;
1271       case(ContactElementsZero):     case(Elements):
1272          Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&(arg.getDataC()),&integrals[0]);     Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_arg,&integrals[0]);
1273          break;     break;
1274       case(ContactElementsOne):     case(ReducedElements):
1275          Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&(arg.getDataC()),&integrals[0]);     Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_arg,&integrals[0]);
1276          break;     break;
1277       case(DegreesOfFreedom):     case(FaceElements):
1278          Finley_ErrorCode=TYPE_ERROR;     Finley_Assemble_integrate(mesh->Nodes,mesh->FaceElements,&_arg,&integrals[0]);
1279          sprintf(Finley_ErrorMsg,"Integral of data on degrees of freedom is not supported.");     break;
1280          break;     case(ReducedFaceElements):
1281       case(ReducedDegreesOfFreedom):     Finley_Assemble_integrate(mesh->Nodes,mesh->FaceElements,&_arg,&integrals[0]);
1282          Finley_ErrorCode=TYPE_ERROR;     break;
1283          sprintf(Finley_ErrorMsg,"Integral of data on reduced degrees of freedom is not supported.");     case(Points):
1284          break;     throw FinleyAdapterException("Error - Integral of data on points is not supported.");
1285       default:     break;
1286          Finley_ErrorCode=TYPE_ERROR;     case(ContactElementsZero):
1287          sprintf(Finley_ErrorMsg,"Integrals: Finley does not know anything about function space type %d",arg.getFunctionSpace().getTypeCode());     Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&_arg,&integrals[0]);
1288          break;     break;
1289    }     case(ReducedContactElementsZero):
1290    checkFinleyError();     Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&_arg,&integrals[0]);
1291       break;
1292       case(ContactElementsOne):
1293       Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&_arg,&integrals[0]);
1294       break;
1295       case(ReducedContactElementsOne):
1296       Finley_Assemble_integrate(mesh->Nodes,mesh->ContactElements,&_arg,&integrals[0]);
1297       break;
1298       case(DegreesOfFreedom):
1299       temp=escript::Data( arg, escript::function(asAbstractContinuousDomain()) );
1300       _temp=temp.getDataC();
1301       Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_temp,&integrals[0]);
1302       break;
1303       case(ReducedDegreesOfFreedom):
1304       temp=escript::Data( arg, escript::function(asAbstractContinuousDomain()) );
1305       _temp=temp.getDataC();
1306       Finley_Assemble_integrate(mesh->Nodes,mesh->Elements,&_temp,&integrals[0]);
1307       break;
1308       default:
1309          stringstream temp;
1310          temp << "Error - Integrals: Finley does not know anything about function space type " << arg.getFunctionSpace().getTypeCode();
1311          throw FinleyAdapterException(temp.str());
1312          break;
1313       }
1314       checkFinleyError();
1315       blocktimer_increment("integrate()", blocktimer_start);
1316  }  }
1317    
1318  //  //
1319  // calculates the gradient of arg:  // calculates the gradient of arg:
1320  //  //
1321  void MeshAdapter::setToGradient(Data& grad,const Data& arg) const  void MeshAdapter::setToGradient(escript::Data& grad,const escript::Data& arg) const
1322  {  {
1323    const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(arg.getFunctionSpace().getDomain());     const MeshAdapter& argDomain=dynamic_cast<const MeshAdapter&>(*(arg.getFunctionSpace().getDomain()));
1324    if (argDomain!=*this)     if (argDomain!=*this)
1325      throw FinleyAdapterException("Error - Illegal domain of gradient argument");        throw FinleyAdapterException("Error - Illegal domain of gradient argument");
1326    const MeshAdapter& gradDomain=dynamic_cast<const MeshAdapter&>(grad.getFunctionSpace().getDomain());     const MeshAdapter& gradDomain=dynamic_cast<const MeshAdapter&>(*(grad.getFunctionSpace().getDomain()));
1327    if (gradDomain!=*this)     if (gradDomain!=*this)
1328       throw FinleyAdapterException("Error - Illegal domain of gradient");        throw FinleyAdapterException("Error - Illegal domain of gradient");
1329    
1330    Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
1331    switch(grad.getFunctionSpace().getTypeCode()) {     escriptDataC _grad=grad.getDataC();
1332         case(Nodes):     escriptDataC nodeDataC;
1333            Finley_ErrorCode=TYPE_ERROR;     escript::Data temp;
1334            sprintf(Finley_ErrorMsg,"Gradient at nodes is not supported.");     if (getMPISize()>1) {
1335            break;        if( arg.getFunctionSpace().getTypeCode() == DegreesOfFreedom ) {
1336         case(Elements):           temp=escript::Data( arg,  continuousFunction(asAbstractContinuousDomain()) );
1337            Finley_Assemble_gradient(mesh->Nodes,mesh->Elements,&(grad.getDataC()),&(arg.getDataC()));           nodeDataC = temp.getDataC();
1338            break;        } else if( arg.getFunctionSpace().getTypeCode() == ReducedDegreesOfFreedom ) {
1339         case(FaceElements):           temp=escript::Data( arg,  reducedContinuousFunction(asAbstractContinuousDomain()) );
1340            Finley_Assemble_gradient(mesh->Nodes,mesh->FaceElements,&(grad.getDataC()),&(arg.getDataC()));           nodeDataC = temp.getDataC();
1341            break;        } else {
1342         case(Points):           nodeDataC = arg.getDataC();
1343            Finley_ErrorCode=TYPE_ERROR;        }
1344            sprintf(Finley_ErrorMsg,"Gradient at points is not supported.");     } else {
1345            break;        nodeDataC = arg.getDataC();
1346         case(ContactElementsZero):     }
1347            Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&(grad.getDataC()),&(arg.getDataC()));     switch(grad.getFunctionSpace().getTypeCode()) {
1348            break;     case(Nodes):
1349         case(ContactElementsOne):     throw FinleyAdapterException("Error - Gradient at nodes is not supported.");
1350            Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&(grad.getDataC()),&(arg.getDataC()));     break;
1351            break;     case(ReducedNodes):
1352         case(DegreesOfFreedom):     throw FinleyAdapterException("Error - Gradient at reduced nodes is not supported.");
1353            Finley_ErrorCode=TYPE_ERROR;     break;
1354            sprintf(Finley_ErrorMsg,"Gradient at degrees of freedom is not supported.");     case(Elements):
1355            break;     Finley_Assemble_gradient(mesh->Nodes,mesh->Elements,&_grad,&nodeDataC);
1356         case(ReducedDegreesOfFreedom):     break;
1357            Finley_ErrorCode=TYPE_ERROR;     case(ReducedElements):
1358            sprintf(Finley_ErrorMsg,"Gradient at reduced degrees of freedom is not supported.");     Finley_Assemble_gradient(mesh->Nodes,mesh->Elements,&_grad,&nodeDataC);
1359            break;     break;
1360         default:     case(FaceElements):
1361            Finley_ErrorCode=TYPE_ERROR;     Finley_Assemble_gradient(mesh->Nodes,mesh->FaceElements,&_grad,&nodeDataC);
1362            sprintf(Finley_ErrorMsg,"Gradient: Finley does not know anything about function space type %d",arg.getFunctionSpace().getTypeCode());     break;
1363            break;     case(ReducedFaceElements):
1364    }     Finley_Assemble_gradient(mesh->Nodes,mesh->FaceElements,&_grad,&nodeDataC);
1365    checkFinleyError();     break;
1366       case(Points):
1367       throw FinleyAdapterException("Error - Gradient at points is not supported.");
1368       break;
1369       case(ContactElementsZero):
1370       Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&_grad,&nodeDataC);
1371       break;
1372       case(ReducedContactElementsZero):
1373       Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&_grad,&nodeDataC);
1374       break;
1375       case(ContactElementsOne):
1376       Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&_grad,&nodeDataC);
1377       break;
1378       case(ReducedContactElementsOne):
1379       Finley_Assemble_gradient(mesh->Nodes,mesh->ContactElements,&_grad,&nodeDataC);
1380       break;
1381       case(DegreesOfFreedom):
1382       throw FinleyAdapterException("Error - Gradient at degrees of freedom is not supported.");
1383       break;
1384       case(ReducedDegreesOfFreedom):
1385       throw FinleyAdapterException("Error - Gradient at reduced degrees of freedom is not supported.");
1386       break;
1387       default:
1388          stringstream temp;
1389          temp << "Error - Gradient: Finley does not know anything about function space type " << arg.getFunctionSpace().getTypeCode();
1390          throw FinleyAdapterException(temp.str());
1391          break;
1392       }
1393       checkFinleyError();
1394  }  }
1395    
1396  //  //
1397  // returns the size of elements:  // returns the size of elements:
1398  //  //
1399  void MeshAdapter::setToSize(Data& size) const  void MeshAdapter::setToSize(escript::Data& size) const
1400  {  {
1401    Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
1402    escriptDataC tmp=size.getDataC();     escriptDataC tmp=size.getDataC();
1403    switch(size.getFunctionSpace().getTypeCode()) {     switch(size.getFunctionSpace().getTypeCode()) {
1404         case(Nodes):     case(Nodes):
1405            Finley_ErrorCode=TYPE_ERROR;     throw FinleyAdapterException("Error - Size of nodes is not supported.");
1406            sprintf(Finley_ErrorMsg,"Size of nodes is not supported.");     break;
1407            break;     case(ReducedNodes):
1408         case(Elements):     throw FinleyAdapterException("Error - Size of reduced nodes is not supported.");
1409            Finley_Assemble_getSize(mesh->Nodes,mesh->Elements,&tmp);     break;
1410            break;     case(Elements):
1411         case(FaceElements):     Finley_Assemble_getSize(mesh->Nodes,mesh->Elements,&tmp);
1412            Finley_Assemble_getSize(mesh->Nodes,mesh->FaceElements,&tmp);     break;
1413            break;     case(ReducedElements):
1414         case(Points):     Finley_Assemble_getSize(mesh->Nodes,mesh->Elements,&tmp);
1415            Finley_ErrorCode=TYPE_ERROR;     break;
1416            sprintf(Finley_ErrorMsg,"Size of point elements is not supported.");     case(FaceElements):
1417            break;     Finley_Assemble_getSize(mesh->Nodes,mesh->FaceElements,&tmp);
1418         case(ContactElementsZero):     break;
1419         case(ContactElementsOne):     case(ReducedFaceElements):
1420            Finley_Assemble_getSize(mesh->Nodes,mesh->ContactElements,&tmp);     Finley_Assemble_getSize(mesh->Nodes,mesh->FaceElements,&tmp);
1421            break;     break;
1422         case(DegreesOfFreedom):     case(Points):
1423            Finley_ErrorCode=TYPE_ERROR;     throw FinleyAdapterException("Error - Size of point elements is not supported.");
1424            sprintf(Finley_ErrorMsg,"Size of degrees of freedom is not supported.");     break;
1425            break;     case(ContactElementsZero):
1426         case(ReducedDegreesOfFreedom):     case(ContactElementsOne):
1427            Finley_ErrorCode=TYPE_ERROR;     Finley_Assemble_getSize(mesh->Nodes,mesh->ContactElements,&tmp);
1428            sprintf(Finley_ErrorMsg,"Size of reduced degrees of freedom is not supported.");     break;
1429            break;     case(ReducedContactElementsZero):
1430         default:     case(ReducedContactElementsOne):
1431            Finley_ErrorCode=TYPE_ERROR;     Finley_Assemble_getSize(mesh->Nodes,mesh->ContactElements,&tmp);
1432            sprintf(Finley_ErrorMsg,"Element size: Finley does not know anything about function space type %d",size.getFunctionSpace().getTypeCode());     break;
1433            break;     case(DegreesOfFreedom):
1434    }     throw FinleyAdapterException("Error - Size of degrees of freedom is not supported.");
1435    checkFinleyError();     break;
1436       case(ReducedDegreesOfFreedom):
1437       throw FinleyAdapterException("Error - Size of reduced degrees of freedom is not supported.");
1438       break;
1439       default:
1440          stringstream temp;
1441          temp << "Error - Element size: Finley does not know anything about function space type " << size.getFunctionSpace().getTypeCode();
1442          throw FinleyAdapterException(temp.str());
1443          break;
1444       }
1445       checkFinleyError();
1446  }  }
1447    
1448  // sets the location of nodes:  // sets the location of nodes:
1449  void MeshAdapter::setNewX(const Data& new_x)  void MeshAdapter::setNewX(const escript::Data& new_x)
1450  {  {
1451    Finley_Mesh* mesh=m_finleyMesh.get();     Finley_Mesh* mesh=m_finleyMesh.get();
1452    const MeshAdapter& newDomain=dynamic_cast<const MeshAdapter&>(new_x.getFunctionSpace().getDomain());     escriptDataC tmp;
1453    if (newDomain!=*this)     const MeshAdapter& newDomain=dynamic_cast<const MeshAdapter&>(*(new_x.getFunctionSpace().getDomain()));
1454       throw FinleyAdapterException("Error - Illegal domain of new point locations");     if (newDomain!=*this)
1455    Finley_NodeFile_setCoordinates(mesh->Nodes,&(new_x.getDataC()));        throw FinleyAdapterException("Error - Illegal domain of new point locations");
1456    checkFinleyError();     tmp = new_x.getDataC();
1457       Finley_Mesh_setCoordinates(mesh,&tmp);
1458       checkFinleyError();
1459  }  }
1460    
1461  // saves a data array in openDX format:  // saves a data array in openDX format:
1462  void MeshAdapter::saveDX(const std::string& filename,const Data& arg) const  void MeshAdapter::saveDX(const std::string& filename,const boost::python::dict& arg) const
1463  {  {
1464    Finley_Mesh_saveDX(filename.c_str(),m_finleyMesh.get(),&(arg.getDataC()));     unsigned int MAX_namelength=IS_THERE_A_REASON_FOR_THIS_MAGIC_NAME_LENGTH;
1465    checkFinleyError();     const int num_data=boost::python::extract<int>(arg.attr("__len__")());
1466       /* win32 refactor */
1467       char* *names = (num_data>0) ? TMPMEMALLOC(num_data,char*) : (char**)NULL;
1468       for(int i=0;i<num_data;i++)
1469       {
1470          names[i] = (MAX_namelength>0) ? TMPMEMALLOC(MAX_namelength,char) : (char*)NULL;
1471       }
1472    
1473       escriptDataC *data = (num_data>0) ? TMPMEMALLOC(num_data,escriptDataC) : (escriptDataC*)NULL;
1474       escriptDataC* *ptr_data = (num_data>0) ? TMPMEMALLOC(num_data,escriptDataC*) : (escriptDataC**)NULL;
1475    
1476       boost::python::list keys=arg.keys();
1477       for (int i=0;i<num_data;++i) {
1478          std::string n=boost::python::extract<std::string>(keys[i]);
1479          escript::Data& d=boost::python::extract<escript::Data&>(arg[keys[i]]);
1480          if (dynamic_cast<const MeshAdapter&>(*(d.getFunctionSpace().getDomain())) !=*this)
1481             throw FinleyAdapterException("Error  in saveVTK: Data must be defined on same Domain");
1482          data[i]=d.getDataC();
1483          ptr_data[i]= &(data[i]);
1484          if (n.length()>MAX_namelength-1) {
1485             strncpy(names[i],n.c_str(),MAX_namelength-1);
1486             names[i][MAX_namelength-1]='\0';
1487          } else {
1488             strcpy(names[i],n.c_str());
1489          }
1490       }
1491       Finley_Mesh_saveDX(filename.c_str(),m_finleyMesh.get(),num_data,names,ptr_data);
1492       checkFinleyError();
1493    
1494       /* win32 refactor */
1495       TMPMEMFREE(data);
1496       TMPMEMFREE(ptr_data);
1497       for(int i=0;i<num_data;i++)
1498       {
1499          TMPMEMFREE(names[i]);
1500       }
1501       TMPMEMFREE(names);
1502    
1503       return;
1504  }  }
1505    
1506  // saves a data array in openVTK format:  // saves a data array in openVTK format:
1507  void MeshAdapter::saveVTK(const std::string& filename,const Data& arg) const  void MeshAdapter::saveVTK(const std::string& filename,const boost::python::dict& arg) const
1508  {  {
1509    Finley_Mesh_saveVTK(filename.c_str(),m_finleyMesh.get(),&(arg.getDataC()));     unsigned int MAX_namelength=IS_THERE_A_REASON_FOR_THIS_MAGIC_NAME_LENGTH;
1510    checkFinleyError();     const int num_data=boost::python::extract<int>(arg.attr("__len__")());
1511  }     /* win32 refactor */
1512       char* *names = (num_data>0) ? TMPMEMALLOC(num_data,char*) : (char**)NULL;
1513       for(int i=0;i<num_data;i++)
1514       {
1515          names[i] = (MAX_namelength>0) ? TMPMEMALLOC(MAX_namelength,char) : (char*)NULL;
1516       }
1517    
1518       escriptDataC *data = (num_data>0) ? TMPMEMALLOC(num_data,escriptDataC) : (escriptDataC*)NULL;
1519       escriptDataC* *ptr_data = (num_data>0) ? TMPMEMALLOC(num_data,escriptDataC*) : (escriptDataC**)NULL;
1520    
1521       boost::python::list keys=arg.keys();
1522       for (int i=0;i<num_data;++i) {
1523          std::string n=boost::python::extract<std::string>(keys[i]);
1524          escript::Data& d=boost::python::extract<escript::Data&>(arg[keys[i]]);
1525          if (dynamic_cast<const MeshAdapter&>(*(d.getFunctionSpace().getDomain())) !=*this)
1526             throw FinleyAdapterException("Error  in saveVTK: Data must be defined on same Domain");
1527          data[i]=d.getDataC();
1528          ptr_data[i]=&(data[i]);
1529          if (n.length()>MAX_namelength-1) {
1530             strncpy(names[i],n.c_str(),MAX_namelength-1);
1531             names[i][MAX_namelength-1]='\0';
1532          } else {
1533             strcpy(names[i],n.c_str());
1534          }
1535       }
1536       Finley_Mesh_saveVTK(filename.c_str(),m_finleyMesh.get(),num_data,names,ptr_data);
1537    
1538       checkFinleyError();
1539       /* win32 refactor */
1540       TMPMEMFREE(data);
1541       TMPMEMFREE(ptr_data);
1542       for(int i=0;i<num_data;i++)
1543       {
1544          TMPMEMFREE(names[i]);
1545       }
1546       TMPMEMFREE(names);
1547    
1548       return;
1549    }
1550                                                                                                                                                                        
1551                                                                                                                                                                        
1552  // creates a SystemMatrixAdapter stiffness matrix an initializes it with zeros:  // creates a SystemMatrixAdapter stiffness matrix an initializes it with zeros:
1553  SystemMatrixAdapter MeshAdapter::newSystemMatrix(  SystemMatrixAdapter MeshAdapter::newSystemMatrix(
1554                        const int row_blocksize,                                                   const int row_blocksize,
1555                        const escript::FunctionSpace& row_functionspace,                                                   const escript::FunctionSpace& row_functionspace,
1556                        const int column_blocksize,                                                   const int column_blocksize,
1557                        const escript::FunctionSpace& column_functionspace,                                                   const escript::FunctionSpace& column_functionspace,
1558                        const int type) const                                                   const int type) const
1559  {  {
1560      int reduceRowOrder=0;     int reduceRowOrder=0;
1561      int reduceColOrder=0;     int reduceColOrder=0;
1562      // is the domain right?     // is the domain right?
1563      const MeshAdapter& row_domain=dynamic_cast<const MeshAdapter&>(row_functionspace.getDomain());     const MeshAdapter& row_domain=dynamic_cast<const MeshAdapter&>(*(row_functionspace.getDomain()));
1564      if (row_domain!=*this)     if (row_domain!=*this)
1565            throw FinleyAdapterException("Error - domain of row function space does not match the domain of matrix generator.");        throw FinleyAdapterException("Error - domain of row function space does not match the domain of matrix generator.");
1566      const MeshAdapter& col_domain=dynamic_cast<const MeshAdapter&>(column_functionspace.getDomain());     const MeshAdapter& col_domain=dynamic_cast<const MeshAdapter&>(*(column_functionspace.getDomain()));
1567      if (col_domain!=*this)     if (col_domain!=*this)
1568            throw FinleyAdapterException("Error - domain of columnn function space does not match the domain of matrix generator.");        throw FinleyAdapterException("Error - domain of columnn function space does not match the domain of matrix generator.");
1569      // is the function space type right     // is the function space type right
1570      if (row_functionspace.getTypeCode()==DegreesOfFreedom) {     if (row_functionspace.getTypeCode()==DegreesOfFreedom) {
1571          reduceRowOrder=0;        reduceRowOrder=0;
1572      } else if (row_functionspace.getTypeCode()==ReducedDegreesOfFreedom) {     } else if (row_functionspace.getTypeCode()==ReducedDegreesOfFreedom) {
1573          reduceRowOrder=1;        reduceRowOrder=1;
1574      } else {     } else {
1575          throw FinleyAdapterException("Error - illegal function space type for system matrix rows.");        throw FinleyAdapterException("Error - illegal function space type for system matrix rows.");
1576      }     }
1577      if (column_functionspace.getTypeCode()==DegreesOfFreedom) {     if (column_functionspace.getTypeCode()==DegreesOfFreedom) {
1578          reduceColOrder=0;        reduceColOrder=0;
1579      } else if (column_functionspace.getTypeCode()==ReducedDegreesOfFreedom) {     } else if (column_functionspace.getTypeCode()==ReducedDegreesOfFreedom) {
1580          reduceColOrder=1;        reduceColOrder=1;
1581      } else {     } else {
1582          throw FinleyAdapterException("Error - illegal function space type for system matrix columns.");        throw FinleyAdapterException("Error - illegal function space type for system matrix columns.");
1583      }     }
1584      // generate matrix:     // generate matrix:
1585        
1586      Finley_SystemMatrixPattern* fsystemMatrixPattern=Finley_getPattern(getFinley_Mesh(),reduceRowOrder,reduceColOrder);     Paso_SystemMatrixPattern* fsystemMatrixPattern=Finley_getPattern(getFinley_Mesh(),reduceRowOrder,reduceColOrder);
1587      checkFinleyError();     checkFinleyError();
1588      Finley_SystemMatrix* fsystemMatrix=Finley_SystemMatrix_alloc(type,fsystemMatrixPattern,row_blocksize,column_blocksize);     Paso_SystemMatrix* fsystemMatrix;
1589      checkFinleyError();     int trilinos = 0;
1590      Finley_SystemMatrixPattern_dealloc(fsystemMatrixPattern);     if (trilinos) {
1591      return SystemMatrixAdapter(fsystemMatrix,row_blocksize,row_functionspace,column_blocksize,column_functionspace);  #ifdef TRILINOS
1592          /* Allocation Epetra_VrbMatrix here */
1593    #endif
1594       }
1595       else {
1596          fsystemMatrix=Paso_SystemMatrix_alloc(type,fsystemMatrixPattern,row_blocksize,column_blocksize);
1597       }
1598       checkPasoError();
1599       Paso_SystemMatrixPattern_free(fsystemMatrixPattern);
1600       return SystemMatrixAdapter(fsystemMatrix,row_blocksize,row_functionspace,column_blocksize,column_functionspace);
1601    }
1602    // creates a TransportProblemAdapter
1603    TransportProblemAdapter MeshAdapter::newTransportProblem(
1604                                                             const double theta,
1605                                                             const int blocksize,
1606                                                             const escript::FunctionSpace& functionspace,
1607                                                             const int type) const
1608    {
1609       int reduceOrder=0;
1610       // is the domain right?
1611       const MeshAdapter& domain=dynamic_cast<const MeshAdapter&>(*(functionspace.getDomain()));
1612       if (domain!=*this)
1613          throw FinleyAdapterException("Error - domain of function space does not match the domain of transport problem generator.");
1614       // is the function space type right
1615       if (functionspace.getTypeCode()==DegreesOfFreedom) {
1616          reduceOrder=0;
1617       } else if (functionspace.getTypeCode()==ReducedDegreesOfFreedom) {
1618          reduceOrder=1;
1619       } else {
1620          throw FinleyAdapterException("Error - illegal function space type for system matrix rows.");
1621       }
1622       // generate matrix:
1623    
1624       Paso_SystemMatrixPattern* fsystemMatrixPattern=Finley_getPattern(getFinley_Mesh(),reduceOrder,reduceOrder);
1625       checkFinleyError();
1626       Paso_FCTransportProblem* transportProblem;
1627       transportProblem=Paso_FCTransportProblem_alloc(theta,fsystemMatrixPattern,blocksize);
1628       checkPasoError();
1629       Paso_SystemMatrixPattern_free(fsystemMatrixPattern);
1630       return TransportProblemAdapter(transportProblem,theta,blocksize,functionspace);
1631  }  }
1632    
1633  //  //
# Line 890  SystemMatrixAdapter MeshAdapter::newSyst Line 1639  SystemMatrixAdapter MeshAdapter::newSyst
1639  // returns true if data at the atom_type is considered as being cell centered:  // returns true if data at the atom_type is considered as being cell centered:
1640  bool MeshAdapter::isCellOriented(int functionSpaceCode) const  bool MeshAdapter::isCellOriented(int functionSpaceCode) const
1641  {  {
1642    switch(functionSpaceCode) {     switch(functionSpaceCode) {
1643         case(Nodes):     case(Nodes):
1644         case(DegreesOfFreedom):     case(DegreesOfFreedom):
1645         case(ReducedDegreesOfFreedom):     case(ReducedDegreesOfFreedom):
1646            return false;     return false;
1647            break;     break;
1648         case(Elements):     case(Elements):
1649         case(FaceElements):     case(FaceElements):
1650         case(Points):     case(Points):
1651         case(ContactElementsZero):     case(ContactElementsZero):
1652         case(ContactElementsOne):     case(ContactElementsOne):
1653            return true;     case(ReducedElements):
1654            break;     case(ReducedFaceElements):
1655         default:     case(ReducedContactElementsZero):
1656            Finley_ErrorCode=TYPE_ERROR;     case(ReducedContactElementsOne):
1657            sprintf(Finley_ErrorMsg,"Cell: Finley does not know anything about function space type %d",functionSpaceCode);     return true;
1658            break;     break;
1659    }     default:
1660    checkFinleyError();        stringstream temp;
1661    return false;        temp << "Error - Cell: Finley does not know anything about function space type " << functionSpaceCode;
1662          throw FinleyAdapterException(temp.str());
1663          break;
1664       }
1665       checkFinleyError();
1666       return false;
1667  }  }
1668    
1669  bool MeshAdapter::probeInterpolationOnDomain(int functionSpaceType_source,int functionSpaceType_target) const  bool MeshAdapter::probeInterpolationOnDomain(int functionSpaceType_source,int functionSpaceType_target) const
1670  {  {
1671    switch(functionSpaceType_source) {     switch(functionSpaceType_source) {
1672       case(Nodes):     case(Nodes):
1673          switch(functionSpaceType_target) {     switch(functionSpaceType_target) {
1674             case(Nodes):     case(Nodes):
1675             case(ReducedDegreesOfFreedom):     case(ReducedNodes):
1676             case(DegreesOfFreedom):     case(ReducedDegreesOfFreedom):
1677             case(Elements):     case(DegreesOfFreedom):
1678             case(FaceElements):     case(Elements):
1679             case(Points):     case(ReducedElements):
1680             case(ContactElementsZero):     case(FaceElements):
1681             case(ContactElementsOne):     case(ReducedFaceElements):
1682                 return true;     case(Points):
1683             default:     case(ContactElementsZero):
1684                 Finley_ErrorCode=TYPE_ERROR;     case(ReducedContactElementsZero):
1685                 sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",functionSpaceType_target);     case(ContactElementsOne):
1686          }     case(ReducedContactElementsOne):
1687          break;     return true;
1688       case(Elements):     default:
1689          if (functionSpaceType_target==Elements) {        stringstream temp;
1690             return true;        temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << functionSpaceType_target;
1691          } else {        throw FinleyAdapterException(temp.str());
1692             return false;     }
1693          }     break;
1694       case(FaceElements):     case(ReducedNodes):
1695          if (functionSpaceType_target==FaceElements) {     switch(functionSpaceType_target) {
1696             return true;     case(ReducedNodes):
1697          } else {     case(ReducedDegreesOfFreedom):
1698             return false;     case(Elements):
1699          }     case(ReducedElements):
1700       case(Points):     case(FaceElements):
1701          if (functionSpaceType_target==Points) {     case(ReducedFaceElements):
1702             return true;     case(Points):
1703          } else {     case(ContactElementsZero):
1704             return false;     case(ReducedContactElementsZero):
1705          }     case(ContactElementsOne):
1706       case(ContactElementsZero):     case(ReducedContactElementsOne):
1707       case(ContactElementsOne):     return true;
1708          if (functionSpaceType_target==ContactElementsZero || functionSpaceType_target==ContactElementsOne) {     case(Nodes):
1709             return true;     case(DegreesOfFreedom):
1710          } else {     return false;
1711             return false;     default:
1712          }        stringstream temp;
1713       case(DegreesOfFreedom):        temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << functionSpaceType_target;
1714          switch(functionSpaceType_target) {        throw FinleyAdapterException(temp.str());
1715             case(ReducedDegreesOfFreedom):     }
1716             case(DegreesOfFreedom):     break;
1717             case(Nodes):     case(Elements):
1718             case(Elements):     if (functionSpaceType_target==Elements) {
1719             case(FaceElements):        return true;
1720             case(Points):     } else if (functionSpaceType_target==ReducedElements) {
1721             case(ContactElementsZero):        return true;
1722             case(ContactElementsOne):     } else {
1723                return true;        return false;
1724             default:     }
1725               Finley_ErrorCode=TYPE_ERROR;     case(ReducedElements):
1726               sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",functionSpaceType_target);     if (functionSpaceType_target==ReducedElements) {
1727          }        return true;
1728          break;     } else {
1729       case(ReducedDegreesOfFreedom):        return false;
1730         switch(functionSpaceType_target) {     }
1731            case(ReducedDegreesOfFreedom):     case(FaceElements):
1732            case(Elements):     if (functionSpaceType_target==FaceElements) {
1733            case(FaceElements):        return true;
1734            case(Points):     } else if (functionSpaceType_target==ReducedFaceElements) {
1735            case(ContactElementsZero):        return true;
1736            case(ContactElementsOne):     } else {
1737                return true;        return false;
1738            case(Nodes):     }
1739            case(DegreesOfFreedom):     case(ReducedFaceElements):
1740               return false;     if (functionSpaceType_target==ReducedFaceElements) {
1741            default:        return true;
1742               Finley_ErrorCode=TYPE_ERROR;     } else {
1743               sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",functionSpaceType_target);        return false;
1744         }     }
1745         break;     case(Points):
1746       default:     if (functionSpaceType_target==Points) {
1747          Finley_ErrorCode=TYPE_ERROR;        return true;
1748          sprintf(Finley_ErrorMsg,"Interpolation On Domain: Finley does not know anything about function space type %d",functionSpaceType_source);     } else {
1749          break;        return false;
1750    }     }
1751    checkFinleyError();     case(ContactElementsZero):
1752    return false;     case(ContactElementsOne):
1753       if (functionSpaceType_target==ContactElementsZero || functionSpaceType_target==ContactElementsOne) {
1754          return true;
1755       } else if (functionSpaceType_target==ReducedContactElementsZero || functionSpaceType_target==ReducedContactElementsOne) {
1756          return true;
1757       } else {
1758          return false;
1759       }
1760       case(ReducedContactElementsZero):
1761       case(ReducedContactElementsOne):
1762       if (functionSpaceType_target==ReducedContactElementsZero || functionSpaceType_target==ReducedContactElementsOne) {
1763          return true;
1764       } else {
1765          return false;
1766       }
1767       case(DegreesOfFreedom):
1768       switch(functionSpaceType_target) {
1769       case(ReducedDegreesOfFreedom):
1770       case(DegreesOfFreedom):
1771       case(Nodes):
1772       case(ReducedNodes):
1773       case(Elements):
1774       case(ReducedElements):
1775       case(Points):
1776       case(FaceElements):
1777       case(ReducedFaceElements):
1778       case(ContactElementsZero):
1779       case(ReducedContactElementsZero):
1780       case(ContactElementsOne):
1781       case(ReducedContactElementsOne):
1782       return true;
1783       default:
1784          stringstream temp;
1785          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << functionSpaceType_target;
1786          throw FinleyAdapterException(temp.str());
1787       }
1788       break;
1789       case(ReducedDegreesOfFreedom):
1790       switch(functionSpaceType_target) {
1791       case(ReducedDegreesOfFreedom):
1792       case(ReducedNodes):
1793       case(Elements):
1794       case(ReducedElements):
1795       case(FaceElements):
1796       case(ReducedFaceElements):
1797       case(Points):
1798       case(ContactElementsZero):
1799       case(ReducedContactElementsZero):
1800       case(ContactElementsOne):
1801       case(ReducedContactElementsOne):
1802       return true;
1803       case(Nodes):
1804       case(DegreesOfFreedom):
1805       return false;
1806       default:
1807          stringstream temp;
1808          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << functionSpaceType_target;
1809          throw FinleyAdapterException(temp.str());
1810       }
1811       break;
1812       default:
1813          stringstream temp;
1814          temp << "Error - Interpolation On Domain: Finley does not know anything about function space type " << functionSpaceType_source;
1815          throw FinleyAdapterException(temp.str());
1816          break;
1817       }
1818       checkFinleyError();
1819       return false;
1820  }  }
1821    
1822  bool MeshAdapter::probeInterpolationACross(int functionSpaceType_source,const AbstractDomain& targetDomain, int functionSpaceType_target) const  bool MeshAdapter::probeInterpolationACross(int functionSpaceType_source,const AbstractDomain& targetDomain, int functionSpaceType_target) const
1823  {  {
1824      return false;     return false;
1825  }  }
1826    
1827  bool MeshAdapter::operator==(const AbstractDomain& other) const  bool MeshAdapter::operator==(const AbstractDomain& other) const
1828  {  {
1829    const MeshAdapter* temp=dynamic_cast<const MeshAdapter*>(&other);     const MeshAdapter* temp=dynamic_cast<const MeshAdapter*>(&other);
1830    if (temp!=0) {     if (temp!=0) {
1831      return (m_finleyMesh==temp->m_finleyMesh);        return (m_finleyMesh==temp->m_finleyMesh);
1832    } else {     } else {
1833      return false;        return false;
1834    }     }
1835  }  }
1836    
1837  bool MeshAdapter::operator!=(const AbstractDomain& other) const  bool MeshAdapter::operator!=(const AbstractDomain& other) const
1838  {  {
1839    return !(operator==(other));     return !(operator==(other));
1840  }  }
1841    
1842  int MeshAdapter::getSystemMatrixTypeId(const int solver, const bool symmetry) const  int MeshAdapter::getSystemMatrixTypeId(const int solver, const int preconditioner, const int package, const bool symmetry) const
1843  {  {
1844     int out=Finley_SystemMatrix_getSystemMatrixTypeId(solver,symmetry?1:0);     int out=Paso_SystemMatrix_getSystemMatrixTypeId(SystemMatrixAdapter::mapOptionToPaso(solver),SystemMatrixAdapter::mapOptionToPaso(preconditioner), SystemMatrixAdapter::mapOptionToPaso(package),symmetry?1:0);
1845     checkFinleyError();     checkPasoError();
1846       return out;
1847    }
1848    int MeshAdapter::getTransportTypeId(const int solver, const int preconditioner, const int package, const bool symmetry) const
1849    {
1850       int out=Paso_FCTransportProblem_getTypeId(SystemMatrixAdapter::mapOptionToPaso(solver),SystemMatrixAdapter::mapOptionToPaso(preconditioner), SystemMatrixAdapter::mapOptionToPaso(package),symmetry?1:0);
1851       checkPasoError();
1852     return out;     return out;
1853  }  }
1854    
1855  Data MeshAdapter::getX() const  escript::Data MeshAdapter::getX() const
1856  {  {
1857    return continuousFunction(asAbstractContinuousDomain()).getX();     return continuousFunction(asAbstractContinuousDomain()).getX();
1858  }  }
1859    
1860  Data MeshAdapter::getNormal() const  escript::Data MeshAdapter::getNormal() const
1861  {  {
1862    return functionOnBoundary(asAbstractContinuousDomain()).getNormal();     return functionOnBoundary(asAbstractContinuousDomain()).getNormal();
1863  }  }
1864    
1865  Data MeshAdapter::getSize() const  escript::Data MeshAdapter::getSize() const
1866  {  {
1867    return function(asAbstractContinuousDomain()).getSize();     return escript::function(asAbstractContinuousDomain()).getSize();
1868  }  }
1869    
1870    int* MeshAdapter::borrowSampleReferenceIDs(int functionSpaceType) const
1871    {
1872       int *out = NULL;
1873       Finley_Mesh* mesh=m_finleyMesh.get();
1874       switch (functionSpaceType) {
1875       case(Nodes):
1876       out=mesh->Nodes->Id;
1877       break;
1878       case(ReducedNodes):
1879       out=mesh->Nodes->reducedNodesId;
1880       break;
1881       case(Elements):
1882       out=mesh->Elements->Id;
1883       break;
1884       case(ReducedElements):
1885       out=mesh->Elements->Id;
1886       break;
1887       case(FaceElements):
1888       out=mesh->FaceElements->Id;
1889       break;
1890       case(ReducedFaceElements):
1891       out=mesh->FaceElements->Id;
1892       break;
1893       case(Points):
1894       out=mesh->Points->Id;
1895       break;
1896       case(ContactElementsZero):
1897       out=mesh->ContactElements->Id;
1898       break;
1899       case(ReducedContactElementsZero):
1900       out=mesh->ContactElements->Id;
1901       break;
1902       case(ContactElementsOne):
1903       out=mesh->ContactElements->Id;
1904       break;
1905       case(ReducedContactElementsOne):
1906       out=mesh->ContactElements->Id;
1907       break;
1908       case(DegreesOfFreedom):
1909       out=mesh->Nodes->degreesOfFreedomId;
1910       break;
1911       case(ReducedDegreesOfFreedom):
1912       out=mesh->Nodes->reducedDegreesOfFreedomId;
1913       break;
1914       default:
1915          stringstream temp;
1916          temp << "Error - Invalid function space type: " << functionSpaceType << " for domain: " << getDescription();
1917          throw FinleyAdapterException(temp.str());
1918          break;
1919       }
1920       return out;
1921    }
1922  int MeshAdapter::getTagFromSampleNo(int functionSpaceType, int sampleNo) const  int MeshAdapter::getTagFromSampleNo(int functionSpaceType, int sampleNo) const
1923  {  {
1924    int* tagList;     int out=0;
1925    int numTags;     Finley_Mesh* mesh=m_finleyMesh.get();
1926    getTagList(functionSpaceType, &tagList, &numTags);     switch (functionSpaceType) {
1927    return tagList[sampleNo];     case(Nodes):
1928       out=mesh->Nodes->Tag[sampleNo];
1929       break;
1930       case(ReducedNodes):
1931       throw FinleyAdapterException(" Error - ReducedNodes does not support tags.");
1932       break;
1933       case(Elements):
1934       out=mesh->Elements->Tag[sampleNo];
1935       break;
1936       case(ReducedElements):
1937       out=mesh->Elements->Tag[sampleNo];
1938       break;
1939       case(FaceElements):
1940       out=mesh->FaceElements->Tag[sampleNo];
1941       break;
1942       case(ReducedFaceElements):
1943       out=mesh->FaceElements->Tag[sampleNo];
1944       break;
1945       case(Points):
1946       out=mesh->Points->Tag[sampleNo];
1947       break;
1948       case(ContactElementsZero):
1949       out=mesh->ContactElements->Tag[sampleNo];
1950       break;
1951       case(ReducedContactElementsZero):
1952       out=mesh->ContactElements->Tag[sampleNo];
1953       break;
1954       case(ContactElementsOne):
1955       out=mesh->ContactElements->Tag[sampleNo];
1956       break;
1957       case(ReducedContactElementsOne):
1958       out=mesh->ContactElements->Tag[sampleNo];
1959       break;
1960       case(DegreesOfFreedom):
1961       throw FinleyAdapterException(" Error - DegreesOfFreedom does not support tags.");
1962       break;
1963       case(ReducedDegreesOfFreedom):
1964       throw FinleyAdapterException(" Error - ReducedDegreesOfFreedom does not support tags.");
1965       break;
1966       default:
1967          stringstream temp;
1968          temp << "Error - Invalid function space type: " << functionSpaceType << " for domain: " << getDescription();
1969          throw FinleyAdapterException(temp.str());
1970          break;
1971       }
1972       return out;
1973    }
1974    
1975    
1976    void MeshAdapter::setTags(const int functionSpaceType, const int newTag, const escript::Data& mask) const
1977    {
1978       Finley_Mesh* mesh=m_finleyMesh.get();
1979       escriptDataC tmp=mask.getDataC();
1980       switch(functionSpaceType) {
1981       case(Nodes):
1982       Finley_NodeFile_setTags(mesh->Nodes,newTag,&tmp);
1983       break;
1984       case(ReducedNodes):
1985       throw FinleyAdapterException("Error - ReducedNodes does not support tags");
1986       break;
1987       case(DegreesOfFreedom):
1988       throw FinleyAdapterException("Error - DegreesOfFreedom does not support tags");
1989       break;
1990       case(ReducedDegreesOfFreedom):
1991       throw FinleyAdapterException("Error - ReducedDegreesOfFreedom does not support tags");
1992       break;
1993       case(Elements):
1994       Finley_ElementFile_setTags(mesh->Elements,newTag,&tmp);
1995       break;
1996       case(ReducedElements):
1997       Finley_ElementFile_setTags(mesh->Elements,newTag,&tmp);
1998       break;
1999       case(FaceElements):
2000       Finley_ElementFile_setTags(mesh->FaceElements,newTag,&tmp);
2001       break;
2002       case(ReducedFaceElements):
2003       Finley_ElementFile_setTags(mesh->FaceElements,newTag,&tmp);
2004       break;
2005       case(Points):
2006       Finley_ElementFile_setTags(mesh->Points,newTag,&tmp);
2007       break;
2008       case(ContactElementsZero):
2009       Finley_ElementFile_setTags(mesh->ContactElements,newTag,&tmp);
2010       break;
2011       case(ReducedContactElementsZero):
2012       Finley_ElementFile_setTags(mesh->ContactElements,newTag,&tmp);
2013       break;
2014       case(ContactElementsOne):
2015       Finley_ElementFile_setTags(mesh->ContactElements,newTag,&tmp);
2016       break;
2017       case(ReducedContactElementsOne):
2018       Finley_ElementFile_setTags(mesh->ContactElements,newTag,&tmp);
2019       break;
2020       default:
2021          stringstream temp;
2022          temp << "Error - Finley does not know anything about function space type " << functionSpaceType;
2023          throw FinleyAdapterException(temp.str());
2024       }
2025       checkFinleyError();
2026       return;
2027    }
2028    
2029    void MeshAdapter::setTagMap(const std::string& name,  int tag)
2030    {
2031       Finley_Mesh* mesh=m_finleyMesh.get();
2032       Finley_Mesh_addTagMap(mesh, name.c_str(),tag);
2033       checkPasoError();
2034       // throwStandardException("MeshAdapter::set TagMap is not implemented.");
2035    }
2036    
2037    int MeshAdapter::getTag(const std::string& name) const
2038    {
2039       Finley_Mesh* mesh=m_finleyMesh.get();
2040       int tag=0;
2041       tag=Finley_Mesh_getTag(mesh, name.c_str());
2042       checkPasoError();
2043       // throwStandardException("MeshAdapter::getTag is not implemented.");
2044       return tag;
2045    }
2046    
2047    bool MeshAdapter::isValidTagName(const std::string& name) const
2048    {
2049       Finley_Mesh* mesh=m_finleyMesh.get();
2050       return Finley_Mesh_isValidTagName(mesh,name.c_str());
2051    }
2052    
2053    std::string MeshAdapter::showTagNames() const
2054    {
2055       stringstream temp;
2056       Finley_Mesh* mesh=m_finleyMesh.get();
2057       Finley_TagMap* tag_map=mesh->TagMap;
2058       while (tag_map) {
2059          temp << tag_map->name;
2060          tag_map=tag_map->next;
2061          if (tag_map) temp << ", ";
2062       }
2063       return temp.str();
2064    }
2065    
2066    int MeshAdapter::getNumberOfTagsInUse(int functionSpaceCode) const
2067    {
2068      Finley_Mesh* mesh=m_finleyMesh.get();
2069      dim_t numTags=0;
2070      switch(functionSpaceCode) {
2071       case(Nodes):
2072              numTags=mesh->Nodes->numTagsInUse;
2073              break;
2074       case(ReducedNodes):
2075              throw FinleyAdapterException("Error - ReducedNodes does not support tags");
2076              break;
2077       case(DegreesOfFreedom):
2078              throw FinleyAdapterException("Error - DegreesOfFreedom does not support tags");
2079              break;
2080       case(ReducedDegreesOfFreedom):
2081              throw FinleyAdapterException("Error - ReducedDegreesOfFreedom does not support tags");
2082              break;
2083       case(Elements):
2084       case(ReducedElements):
2085              numTags=mesh->Elements->numTagsInUse;
2086              break;
2087       case(FaceElements):
2088       case(ReducedFaceElements):
2089              numTags=mesh->FaceElements->numTagsInUse;
2090              break;
2091       case(Points):
2092              numTags=mesh->Points->numTagsInUse;
2093              break;
2094       case(ContactElementsZero):
2095       case(ReducedContactElementsZero):
2096       case(ContactElementsOne):
2097       case(ReducedContactElementsOne):
2098              numTags=mesh->ContactElements->numTagsInUse;
2099              break;
2100       default:
2101          stringstream temp;
2102          temp << "Error - Finley does not know anything about function space type " << functionSpaceCode;
2103          throw FinleyAdapterException(temp.str());
2104      }
2105      return numTags;
2106    }
2107    int* MeshAdapter::borrowListOfTagsInUse(int functionSpaceCode) const
2108    {
2109      Finley_Mesh* mesh=m_finleyMesh.get();
2110      index_t* tags=NULL;
2111      switch(functionSpaceCode) {
2112       case(Nodes):
2113              tags=mesh->Nodes->tagsInUse;
2114              break;
2115       case(ReducedNodes):
2116              throw FinleyAdapterException("Error - ReducedNodes does not support tags");
2117              break;
2118       case(DegreesOfFreedom):
2119              throw FinleyAdapterException("Error - DegreesOfFreedom does not support tags");
2120              break;
2121       case(ReducedDegreesOfFreedom):
2122              throw FinleyAdapterException("Error - ReducedDegreesOfFreedom does not support tags");
2123              break;
2124       case(Elements):
2125       case(ReducedElements):
2126              tags=mesh->Elements->tagsInUse;
2127              break;
2128       case(FaceElements):
2129       case(ReducedFaceElements):
2130              tags=mesh->FaceElements->tagsInUse;
2131              break;
2132       case(Points):
2133              tags=mesh->Points->tagsInUse;
2134              break;
2135       case(ContactElementsZero):
2136       case(ReducedContactElementsZero):
2137       case(ContactElementsOne):
2138       case(ReducedContactElementsOne):
2139              tags=mesh->ContactElements->tagsInUse;
2140              break;
2141       default:
2142          stringstream temp;
2143          temp << "Error - Finley does not know anything about function space type " << functionSpaceCode;
2144          throw FinleyAdapterException(temp.str());
2145      }
2146      return tags;
2147  }  }
2148    
2149  int MeshAdapter::getReferenceNoFromSampleNo(int functionSpaceType, int sampleNo) const  
2150  {  bool MeshAdapter::canTag(int functionSpaceCode) const
2151    int* referenceNoList;  {
2152    int numReferenceNo;    switch(functionSpaceCode) {
2153    getReferenceNoList(functionSpaceType, &referenceNoList, &numReferenceNo);     case(Nodes):
2154    return referenceNoList[sampleNo];     case(Elements):
2155       case(ReducedElements):
2156       case(FaceElements):
2157       case(ReducedFaceElements):
2158       case(Points):
2159       case(ContactElementsZero):
2160       case(ReducedContactElementsZero):
2161       case(ContactElementsOne):
2162       case(ReducedContactElementsOne):
2163              return true;
2164       case(ReducedNodes):
2165       case(DegreesOfFreedom):
2166       case(ReducedDegreesOfFreedom):
2167          return false;
2168       default:
2169        return false;
2170      }
2171  }  }
2172    
2173    
2174  }  // end of namespace  }  // end of namespace

Legend:
Removed from v.149  
changed lines
  Added in v.2087

  ViewVC Help
Powered by ViewVC 1.1.26