/[escript]/trunk/scons/badger_options.py
ViewVC logotype

Diff of /trunk/scons/badger_options.py

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 2881 by jfenwick, Thu Jan 28 02:03:15 2010 UTC revision 3259 by jfenwick, Mon Oct 11 01:48:14 2010 UTC
# Line 11  Line 11 
11  #  #
12  ########################################################  ########################################################
13    
14    # PREFIXES:
15    # There are two ways to specify where to find dependent headers and libraries
16    # (via the <dependency>_prefix):
17    # 1) If your installation follows the general scheme where headers are located
18    #    in <prefix>/include[32,64], and libraries in <prefix>/lib[32,64] then
19    #    it is sufficient to specify this prefix, e.g. boost_prefix='/usr'
20    # 2) Otherwise provide a list with two elements, where the first one is the
21    #    include path, and the second the library path, e.g.
22    #    boost_prefix=['/usr/include/boost1_44', '/usr/lib']
23    # All <dependency>_prefix settings default to '/usr'
24    
25  # Configuration for shake63 (32-bit Intel running Fedora Linux)  # The options file version. SCons will refuse to build if there have been
26    # changes to the set of variables and your file has not been updated.
27    # This setting is mandatory.
28    escript_opts_version = 200
29    
30  # If you cannot use the default compiler flags set in SConstruct, then change them here  # Installation prefix. Files will be installed in subdirectories underneath.
31  # C/C++ Compiler flags (always use cc_flags and either cc_optim or cc_debug)  # DEFAULT: '.' (current directory)
32  # cc_flags      = '-ansi'  #prefix = '/usr/local'
33  # cc_optim      = '-O2'  
34  # cc_debug      = '-g'  # C compiler command name or full path.
35  omp_optim       = '-fopenmp'  # DEFAULT: auto-detected
36  omp_debug       = '-fopenmp'  #cc = 'gcc'
37  omp_libs        = ['gomp']  
38    dudley_assemble_flags = '-funroll-loops'
39  # Use the default C/C++ flags but add something only for this host:  
40  #cc_extra       = '-Wall -pedantic -isystem /usr/include/boost/ -isystem /usr/include/python2.5/ -Wno-sign-compare -Wno-long-long'  # C++ compiler command name or full path.
41  #cc_extra       = '-fopenmp'  # DEFAULT: auto-detected
42  # ld_extra      = ''  #cxx = 'g++'
43  cc_extra = ''  
44    # Flags to use with both C and C++ compilers. Do not set unless you know
45  # Be picky about errors  # what you are doing - use cc_extra to specify additional flags!
46  # usepedantic       = 'no'  # DEFAULT: compiler-dependent
47    #cc_flags = ''
48  # Extra libraries  
49  # sys_libs      = ['guide', 'pthread', 'stdc++']  # Additional compiler (optimization) flags for non-debug builds
50    # DEFAULT: compiler-dependent
51  # Python libraries  #cc_optim = '-O3 -mmmx -msse'
52  python_path     = '/usr/include/python2.5'  
53  python_lib_path     = ''  # Additional compiler flags for debug builds
54  python_libs     = 'python2.5'  # DEFAULT: compiler-dependent
55  # python_cmd        = 'python'  #cc_debug = '-g'
56    
57  # Boost libraries  # Additional flags to add to the C compiler only
58  boost_path      = '/usr/include/'  # DEFAULT: '' (empty)
59  boost_lib_path      = ''  #cc_extra = '--std=c99'
60  boost_libs      = ['boost_python']  
61    # Additional flags to add to the C++ compiler only
62  # Specify whether or not to use VTK  # DEFAULT: '' (empty)
63  # usevtk        = 'yes'  #cxx_extra = ''
64    
65  # NetCDF  # Additional flags to add to the linker
66  # usenetcdf     = 'yes'  # DEFAULT: '' (empty)
67  netCDF_path     = '/usr/include/netcdf-3'  #ld_extra = ''
68  netCDF_lib_path     = ''  
69  # netCDF_libs       = ['netcdf_c++', 'netcdf']  # Whether to treat compiler warnings as errors
70    # DEFAULT: True
71  # MKL  #werror = False
72  # usemkl        = 'yes'  
73  # mkl_path      = '/sw/sdev/cmkl/10.0.2.18/include'  # Whether to build a debug version
74  # mkl_lib_path      = '/sw/sdev/cmkl/10.0.2.18/lib/em64t'  # DEFAULT: False
75  # mkl_libs      = ['mkl_solver', 'mkl_em64t', 'mkl_core', 'guide', 'pthread']  #debug = True
76    
77  # UMFPACK (requires AMD and BLAS)  # Set to True to print the full compiler/linker command line
78  # useumfpack        = 'yes'  # DEFAULT: False
79  # ufc_path      = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/include'  #verbose = True
80  # umf_path      = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/include'  
81  # umf_lib_path      = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/lib'  # Set to True to add flags that enable OpenMP parallelization
82  # umf_libs      = ['umfpack']  # DEFAULT: False
83  # amd_path      = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/include'  #openmp = True
84  # amd_lib_path      = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/lib'  
85  # amd_libs      = ['amd']  # Additional compiler flags for OpenMP builds
86  # blas_path     = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/include'  # DEFAULT: compiler-dependent
87  # blas_lib_path     = '/sw/libs/umfpack/x86_64/gcc-4.1.2/umfpack-5.2/lib'  #omp_flags = '-fopenmp'
88  # blas_libs     = ['blas']  
89    # Additional linker flags for OpenMP builds
90  #Lapack  # DEFAULT: compiler-dependent
91  uselapack       = 'yes'  #omp_ldflags = '-fopenmp'
92  lapack_path     = ''#'/usr/include'  
93  lapack_lib_path     = ''#'/usr/lib/atlas'  # Flavour of MPI implementation
94  lapack_libs     = ['lapack-3','blas-3']  # Recognized values: 'none', 'MPT', 'MPICH', 'MPICH2', 'OPENMPI', 'INTELMPI'
95  lapack_type     = 'clapack'  # DEFAULT: 'none' (disable MPI)
96    #mpi = 'OPENMPI'
97  # OpenMP  
98  #useopenmp      = 'yes'  # Prefix or paths to MPI headers and libraries. See note above about prefixes.
99    mpi_prefix = '/usr/lib/openmpi'
100  # MPICH2 (to run Escript use: module load mpich2/gcc-4.1.2/mpich2-1.0.7)  
101  # usempi        = 'no'  # MPI libraries to link against
102  # mpi_path      = '/home/Work/InstallArea/mpich2-1.0.7/include'  mpi_libs = ['mpi_cxx', 'mpi', 'open-rte', 'open-pal']
103  # mpi_lib_path      = '/home/Work/InstallArea/mpich2-1.0.7/lib'  
104  # mpi_libs      = ['mpich', 'rt']  # Prefix or paths to boost-python headers and libraries. See note above.
105  # mpi_flavour       = "MPICH"  #boost_prefix = '/usr/local'
106    
107  # MPICH2 for jumpshot (to run Escript use: module load mpich2/gcc-4.1.2/mpich2-1.0.7)  # boost-python library/libraries to link against
108  # mpi_path      = '/home/Work/InstallArea/mpich2-1.0.7/include'  #boost_libs = ['boost_python']
109  # mpi_lib_path      = '/home/Work/InstallArea/mpich2-1.0.7/lib'  
110  # mpi_libs      = ['lmpe', 'mpe', 'mpich', 'rt']  # Whether to use the netCDF library for dump file support
111  # mpi_flavour       = "MPICH"  # DEFAULT: False
112    #netcdf = True
113  # ParMETIS (for use with MPI)  
114  # useparmetis       = 'yes'  # Prefix or paths to netCDF headers and libraries. See note above.
115  # parmetis_path     = '/home/Work/InstallArea/parmetis-3.1/include'  netcdf_prefix = ['/usr/include/netcdf-3', '/usr/lib']
116  # parmetis_lib_path = '/home/Work/InstallArea/parmetis-3.1/lib'  
117  # parmetis_libs     = ['parmetis', 'metis']  # netCDF library/libraries to link against
118    #netcdf_libs = ['netcdf_c++', 'netcdf']
119  # PAPI  
120  # usepapi       = 'no'  # Whether to use the parMETIS library (only in conjunction with MPI)
121  # papi_path     = '/usr/include'  # DEFAULT: False
122  # papi_lib_path     = '/usr/lib'  parmetis = True
123  # papi_libs     = ['papi']  
124  # papi_instrument_solver    = 'no'  # Prefix or paths to parMETIS headers and libraries. See note above.
125    #parmetis_prefix = '/usr/local'
126    
127    # parMETIS library/libraries to link against
128    #parmetis_libs = ['parmetis', 'metis']
129    
130    # Whether to use the Intel PAPI (Performance API) library
131    # DEFAULT: False
132    #papi = True
133    
134    # Prefix or paths to PAPI headers and libraries. See note above.
135    #papi_prefix = '/usr/local'
136    
137    # PAPI library/libraries to link against
138    #papi_libs = ['papi']
139    
140    # Whether to use PAPI to instrument solver iterations
141    # DEFAULT: False
142    #papi_instrument_solver = True
143    
144    # Whether to use Intel MKL (Math Kernel Library)
145    # DEFAULT: False
146    #mkl = True
147    
148    # Prefix or paths to MKL headers and libraries. See note above.
149    #mkl_prefix = '/usr'
150    
151    # MKL library/libraries to link against
152    #mkl_libs = ['mkl_solver', 'mkl_em64t', 'mkl_core', 'guide', 'pthread']
153    
154    # Whether to use UMFPACK (requires AMD and BLAS)
155    # DEFAULT: False
156    #umfpack = True
157    
158    # Prefix or paths to UMFPACK headers and libraries. See note above.
159    #umfpack_prefix = ['/usr/include/suitesparse', '/usr/lib']
160    
161    # UMFPACK library/libraries to link against
162    #umfpack_libs = ['umfpack']
163    
164    # Flavour of LAPACK implementation
165    # Recognized values: 'none', 'clapack', 'mkl'
166    # DEFAULT: 'none' (do not use LAPACK)
167    lapack = 'clapack'
168    
169    # Prefix or paths to LAPACK headers and libraries. See note above.
170    lapack_prefix = ['/usr/include','/usr/lib/atlas']
171    
172    # LAPACK library/libraries to link against
173    lapack_libs = ['lapack_atlas']
174    
175    # Whether to use LLNL's SILO library for Silo output file support in weipa
176    # DEFAULT: False
177    #silo = True
178    
179    # Prefix or paths to SILO headers and libraries. See note above.
180    #silo_prefix = '/usr/local'
181    
182    # SILO library/libraries to link against
183    #silo_libs = ['siloh5', 'hdf5']
184    
185    # Whether to use LLNL's VisIt simulation interface (only version 2 supported)
186    # DEFAULT: False
187    #visit = True
188    
189    # Prefix or paths to VisIt's sim2 headers and libraries. See note above.
190    #visit_prefix = '/opt/visit/2.1.0/linux-intel/libsim/V2'
191    
192    # Sim2 library/libraries to link against
193    #visit_libs = ['simV2']
194    
195    # Whether to enable the deprecated PyVisi interface (requires the VTK python
196    # modules)
197    # DEFAULT: False
198    #pyvisi = True
199    
200    
201    ### ADVANCED OPTIONS ###
202    # Do not change the following options unless you know what they do
203    
204    # Extra libraries to link with
205    #sys_libs = []
206    
207    # Additional environmental variables to export to the tools
208    #env_export = []
209    
210    # Build a shared esysUtils library
211    #share_esysutils = True
212    
213    # Build a shared paso library
214    #share_paso = True
215    
216    #tools_names = ['default']
217    
218    #iknowwhatimdoing = False
219    
220    #forcelazy = 'leave_alone'
221    
222    #forcecollres = 'leave_alone'
223    

Legend:
Removed from v.2881  
changed lines
  Added in v.3259

  ViewVC Help
Powered by ViewVC 1.1.26